Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 2638261, 11 pages
http://dx.doi.org/10.1155/2016/2638261
Research Article

Research on Cutting Force of Turn-Milling Based on Thin-Walled Blade

1School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
2School of Mechanical Engineering and Automation, Dalian University of Technology, Dalian 116024, China

Received 18 February 2016; Revised 7 April 2016; Accepted 10 April 2016

Academic Editor: Massimiliano Barletta

Copyright © 2016 Lida Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U. Karaguzel, M. Bakkal, and E. Budak, “Process modeling of turn-milling using analytical approach,” Procedia CIRP, vol. 4, pp. 131–139, 2012. View at Publisher · View at Google Scholar
  2. U. Karagüzel, E. Uysal, E. Budak, and M. Bakkal, “Analytical modeling of turn-milling process geometry, kinematics and mechanics,” International Journal of Machine Tools & Manufacture, vol. 91, pp. 24–33, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Ekinovic, E. Begovic, and A. Silajdzija, “Comparison of machined surface quality obtained by high-speed machining and conventional turning,” Machining Science and Technology, vol. 11, no. 4, pp. 531–551, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Škorić, T. Udiljak, and D. Ciglar, “Study of the suitability of the machining of rotating surfaces,” Transactions of Famena, vol. 32, no. 2, pp. 69–83, 2008. View at Google Scholar · View at Scopus
  5. M. Pogacnik and J. Kopac, “Dynamic stabilization of the turn-milling process by parameter optimization,” Proceedings of the Institution of Mechanical Engineers, Part B, vol. 214, no. 2, pp. 127–135, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. S. K. Choudhury and J. B. Bajpai, “Investigation in orthogonal turn-milling towards better surface finish,” Journal of Materials Processing Technology, vol. 170, no. 3, pp. 487–493, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. S. K. Choudhury and K. S. Mangrulkar, “Investigation of orthogonal turn-milling for the machining of rotationally symmetrical work pieces,” Journal of Materials Processing Technology, vol. 99, no. 1, pp. 120–128, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Calleja, A. Fernandez, A. Rodriguez, L. N. de Lacalle, and A. Lamikiz, “Turn-milling of blades in turning centres and multitasking machines controlling tool tilt angle,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, no. 8, pp. 1324–1336, 2015. View at Publisher · View at Google Scholar
  9. C. M. Lee, S. W. Kim, Y. H. Lee, and D. W. Lee, “The optimal cutter orientation in ball end milling of cantilever-shaped thin plate,” Journal of Materials Processing Technology, vol. 153–154, pp. 900–906, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Fontaine, A. Moufki, A. Devillez, and D. Dudzinski, “Modelling of cutting forces in ball-end milling with tool-surface inclination. Part I: predictive force model and experimental validation,” Journal of Materials Processing Technology, vol. 189, no. 1–3, pp. 73–84, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Biermann, P. Kersting, and T. Surmann, “A general approach to simulating workpiece vibrations during five-axis milling of turbine blades,” CIRP Annals—Manufacturing Technology, vol. 59, no. 1, pp. 125–128, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Lazoglu, Y. Boz, and H. Erdim, “Five-axis milling mechanics for complex free form surfaces,” CIRP Annals-Manufacturing Technology, vol. 60, no. 1, pp. 117–120, 2011. View at Publisher · View at Google Scholar
  13. E. Budak, E. Ozturk, and L. T. Tunc, “Modeling and simulation of 5-axis milling processes,” CIRP Annals—Manufacturing Technology, vol. 58, no. 1, pp. 347–350, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Budak, “Improving 5-axis milling operations using process models,” MM Science Journal, pp. 358–365, 2012. View at Google Scholar
  15. E. Ozturk and E. Budak, “Dynamics and stability of five-axis ball-end milling,” Journal of Manufacturing Science and Engineering, vol. 132, no. 2, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Ozturk, L. T. Tunc, and E. Budak, “Investigation of lead and tilt angle effects in 5-axis ball-end milling processes,” International Journal of Machine Tools & Manufacture, vol. 49, no. 14, pp. 1053–1062, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Budak, A. Comak, and E. Öztürk, “Stability and high performance machining conditions in simultaneous milling,” CIRP Annals—Manufacturing Technology, vol. 62, no. 1, pp. 403–406, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Herranz, F. J. Campa, L. N. L. De Lacalle et al., “The milling of airframe components with low rigidity: a general approach to avoid static and dynamic problems,” Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, vol. 219, no. 11, pp. 789–801, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. D. Olvera, L. N. L. de Lacalle, F. I. Compeán, A. Fz-Valdivielso, A. Lamikiz, and F. J. Campa, “Analysis of the tool tip radial stiffness of turn-milling centers,” The International Journal of Advanced Manufacturing Technology, vol. 60, no. 9, pp. 883–891, 2012. View at Publisher · View at Google Scholar
  20. A. Lamikiz, L. N. López de Lacalle, O. Ocerin, D. Díez, and E. Maidagan, “The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres,” The International Journal of Advanced Manufacturing Technology, vol. 37, no. 1, pp. 122–139, 2008. View at Publisher · View at Google Scholar
  21. G. M. Kim, B. H. Kim, and C. N. Chu, “Estimation of cutter deflection and form error in ball-end milling processes,” International Journal of Machine Tools and Manufacture, vol. 43, no. 9, pp. 917–924, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. E. B. Kivanc and E. Budak, “Structural modeling of end mills for form error and stability analysis,” International Journal of Machine Tools & Manufacture, vol. 44, no. 11, pp. 1151–1161, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. Q. Cao, J. Zhao, S. Han, and X. Chen, “Force coefficients identification considering inclination angle for ball-end finish milling,” Precision Engineering, vol. 36, no. 2, pp. 252–260, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Lee and Y. Altintaş, “Prediction of ball-end milling forces from orthogonal cutting data,” International Journal of Machine Tools and Manufacture, vol. 36, no. 9, pp. 1059–1072, 1996. View at Publisher · View at Google Scholar · View at Scopus