Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 3696025, 11 pages
http://dx.doi.org/10.1155/2016/3696025
Research Article

Long-Span Wooden Structural Floors with Self-Tensioning System: Performance under Asymmetrical Loads

Department of Construction Technology, Universidade da Coruña, A Coruña, Spain

Received 1 June 2016; Accepted 7 July 2016

Academic Editor: Ana S. Guimarães

Copyright © 2016 J. Estévez-Cimadevila et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Borri and M. Corradi, “Strengthening of timber beams with high strength steel cords,” Composites Part B: Engineering, vol. 42, no. 6, pp. 1480–1491, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. C. A. Issa and Z. Kmeid, “Advanced wood engineering: glulam beams,” Construction and Building Materials, vol. 19, no. 2, pp. 99–106, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. V. De Luca and C. Marano, “Prestressed glulam timbers reinforced with steel bars,” Construction and Building Materials, vol. 30, pp. 206–217, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. J. H. Negrão, “Prestressing systems for timber beams,” in Proceedings of the World Conference on Timber Engineering (WCTE '12), vol. 1, pp. 252–261, Auckland, New Zealand, July 2012. View at Scopus
  5. J. Soriano, B. P. Pellis, and N. T. Mascia, “Mechanical performance of glued-laminated timber beams symmetrically reinforced with steel bars,” Composite Structures, vol. 150, pp. 200–207, 2016. View at Publisher · View at Google Scholar
  6. I. Glišović, B. Stevanović, and M. Todorović, “Flexural reinforcement of glulam beams with CFRP plates,” Materials and Structures, vol. 49, no. 7, pp. 2841–2855, 2016. View at Publisher · View at Google Scholar
  7. Z. W. Guan, P. D. Rodd, and D. J. Pope, “Study of glulam beams pre-stressed with pultruded GRP,” Computers and Structures, vol. 83, no. 28–30, pp. 2476–2487, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Yusof and A. L. Saleh, “Flexural strengthening of timber beams using glass fibre reinforced polymer,” Electronic Journal of Structural Engineering, vol. 10, pp. 45–56, 2010. View at Google Scholar · View at Scopus
  9. P. De La Rosa García, A. C. Escamilla, and M. N. González García, “Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials,” Composites Part B: Engineering, vol. 55, pp. 528–536, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. A. D'Ambrisi, F. Focacci, and R. Luciano, “Experimental investigation on flexural behavior of timber beams repaired with CFRP plates,” Composite Structures, vol. 108, no. 1, pp. 720–728, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Brunner and M. Schnüriger, “Strengthening timber beams with prestressed artificial fibres: the delamination problem,” in Proceedings of the COST C12 Final Conference, vol. 1, pp. 219–224, 2005.
  12. R. Kliger, M. Al-Emrani, M. Johansson, and R. Crocetti, “Strengthening timber with CFRP or steel plates—short and long-term performance,” in Proceedings of the 10th World Conference on Timber Engineering (WCTE '08), vol. 1, pp. 414–421, Miyazaki, Japan, June 2008. View at Scopus
  13. A. Buchanan, A. Palermo, D. Carradine, and S. Pampanin, “Post-tensioned timber frame buildings,” Structural Engineer, vol. 89, no. 17, pp. 24–30, 2011. View at Google Scholar · View at Scopus
  14. W. Van Beerschoten, A. Palermo, D. Carradine, and S. Pampanin, “Design procedure for long-span post-tensioned timber frames under gravity loading,” in Proceedings of the 12th World Conference on Timber Engineering (WCTE '12), vol. 1, pp. 354–361, July 2012. View at Scopus
  15. E. McConnell, D. McPolin, and S. Taylor, “Post-tensioning of glulam timber with steel tendons,” Construction and Building Materials, vol. 73, pp. 426–433, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Smith, F. C. Ponzo, A. Di Cesare et al., “Post-tensioned glulam beam-column joints with advanced damping systems: testing and numerical analysis,” Journal of Earthquake Engineering, vol. 18, no. 1, pp. 147–167, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Wanninger and A. Frangi, “Experimental and analytical analysis of a post-tensioned timber connection under gravity loads,” Engineering Structures, vol. 70, pp. 117–129, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. B. Anshari, Z. W. Guan, A. Kitamori, K. Jung, and K. Komatsu, “Structural behaviour of glued laminated timber beams pre-stressed by compressed wood,” Construction and Building Materials, vol. 29, pp. 24–32, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Estévez-Cimadevila, D. Otero-Chans, E. Martín-Gutiérrez, and F. Suárez-Riestra, “Self-tensioning system for long-span wooden structural floors,” Construction and Building Materials, vol. 102, pp. 852–860, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. European Committee for Standardization (CEN), “Timber structures—glued laminated timber and glued solid timber—requirements,” EN 14080:2013, 2013. View at Google Scholar
  21. European Technical Assesment ETA-14/0349: 2014, 2014.
  22. European Committee for Standardization (CEN), “Prestressing steels—part 4: bars,” prEN 10138-4:2000, 2000. View at Google Scholar
  23. European Committee for Standardization (CEN), “Eurocode 1: actions on structures—Part 1-1: general actions—densities, self-weight, imposed loads for buildings,” EN 1991-1-1:2003/AC:2010.
  24. EN 1995-1-1:2004/AC:2006, European Committee for Standardization (CEN). Eurocode 5: design of timber structures. Part 1-1: General rules and rules for buildings.
  25. D. Otero-Chans, J. Estévez-Cimadevila, and E. Martín-Gutiérrez, “Withdrawal strength of threaded steel rods glued with epoxy in wood,” International Journal of Adhesion & Adhesives, vol. 44, pp. 115–121, 2013. View at Publisher · View at Google Scholar · View at Scopus