Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 4356967, 19 pages
http://dx.doi.org/10.1155/2016/4356967
Research Article

Development of Shear Capacity Prediction Model for FRP-RC Beam without Web Reinforcement

Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka 1208, Bangladesh

Received 19 May 2016; Accepted 24 August 2016

Academic Editor: Carlo Santulli

Copyright © 2016 Md. Arman Chowdhury et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Guadagnini, K. Pilakoutas, and P. Waldron, “Shear resistance of FRP RC beams: experimental study,” Journal of Composites for Construction, vol. 10, no. 6, pp. 464–473, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Lee and C. Lee, “Prediction of shear strength of FRP-reinforced concrete flexural members without stirrups using artificial neural networks,” Engineering Structures, vol. 61, pp. 99–112, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Machial, M. S. Alam, and A. Rteil, “Shear strength contribution of transverse FRP reinforcement in bridge girders,” in Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, Dhaka, Bangladesh, August 2010.
  4. K. Nasrollahzadeh and M. M. Basiri, “Prediction of shear strength of FRP reinforced concrete beams using fuzzy inference system,” Expert Systems with Applications, vol. 41, no. 4, pp. 1006–1020, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Tomlinson and A. Fam, “Performance of concrete beams reinforced with basalt FRP for flexure and shear,” Journal of Composites for Construction, vol. 19, no. 2, Article ID 04014036, 2014. View at Publisher · View at Google Scholar
  6. S. Jung and K. S. Kim, “Knowledge-based prediction of shear strength of concrete beams without shear reinforcement,” Engineering Structures, vol. 30, no. 6, pp. 1515–1525, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Godat, P. Labossière, and K. W. Neale, “Numerical investigation of the parameters influencing the behaviour of FRP shear-strengthened beams,” Construction and Building Materials, vol. 32, pp. 90–98, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Machial, M. S. Alam, and A. Rteil, “Revisiting the shear design equations for concrete beams reinforced with FRP rebar and stirrup,” Materials and Structures, vol. 45, no. 11, pp. 1593–1612, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. T. C. Zsutty, “Beam shear strength prediction by analysis of existing data,” ACI Journal Proceedings, vol. 65, no. 11, pp. 763–773, 1968. View at Google Scholar
  10. T. Zsutty, “Shear strength prediction for separate catagories of simple beam tests,” ACI Journal Proceedings, vol. 68, no. 2, pp. 138–143, 1971. View at Publisher · View at Google Scholar
  11. A. El-Sayed, E. El-Salakawy, and B. Benmokrane, “Shear strength of one-way concrete slabs reinforced with fiber-reinforced polymer composite bars,” Journal of Composites for Construction, vol. 9, no. 2, pp. 147–157, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. A. K. El-Sayed, E. F. El-Salakawy, and B. Benmokrane, “Shear strength of concrete beams reinforced with FRP bars: design method,” ACI Special Publication 230, 2005. View at Google Scholar
  13. T. Nagasaka, H. Fukuyama, and M. Tanigaki, Shear Performance of Concrete Beams Reinforced with FRP Stirrups, vol. 138 of ACI Special Publication, 1993.
  14. M. Nehdi, H. El Chabib, and A. A. Saïd, “Proposed shear design equations for FRP-reinforced concrete beams based on genetic algorithms approach,” Journal of Materials in Civil Engineering, vol. 19, no. 12, pp. 1033–1042, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. Canadian Standard Association (CSA), “Design and construction of building components with fibre-reinforced polymers,” Tech. Rep. CSAS806-02, Canadian Standard Association (CSA), Mississauga, Canada, 2002. View at Google Scholar
  16. I. F. Kara, “Prediction of shear strength of FRP-reinforced concrete beams without stirrups based on genetic programming,” Advances in Engineering Software, vol. 42, no. 6, pp. 295–304, 2011. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  17. A. G. Razaqpur, B. O. Isgor, S. Greenaway, and A. Selley, “Concrete contribution to the shear resistance of fiber reinforced polymer reinforced concrete members,” Journal of Composites for Construction, vol. 8, no. 5, pp. 452–460, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. M. S. Alam and A. Hussein, “Experimental investigation on the effect of longitudinal reinforcement on shear strength of fibre reinforced polymer reinforced concrete beams,” Canadian Journal of Civil Engineering, vol. 38, no. 3, pp. 243–251, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. F. M. Wegian and H. A. Abdalla, “Shear capacity of concrete beams reinforced with fiber reinforced polymers,” Composite Structures, vol. 71, no. 1, pp. 130–138, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. H. El Chabib, M. Nehdi, and A. A. Saïd, “Predicting the effect of stirrups on shear strength of reinforced normal-strength concrete (NSC) and high-strength concrete (HSC) slender beams using artificial intelligence,” Canadian Journal of Civil Engineering, vol. 33, no. 8, pp. 933–944, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. C. H. Kim and H. S. Jang, “Concrete shear strength of normal and lightweight concrete beams reinforced with FRP bars,” Journal of Composites for Construction, vol. 18, no. 2, Article ID 04013038, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. Japan Society of Civil Engineers (JSCE), “Recommendations for design and construction of concrete structures using continuous fibre reinforced materials,” in Research Committee on Continuous Fibre Reinforced Materials, A. Machida, Ed., Japan Society of Civil Engineers (JSCE), Tokyo, Japan, 1997. View at Google Scholar
  23. British Institution of Structural Engineers (BISE), Interim Guidance on the Design of Reinforced Concrete Structures Using Fiber Composite Reinforcement, IStructE, SETO Ltd., London, UK, 1999.
  24. ISIS Canada, Reinforcing Concrete Structures with Fiber Reinforced Polymers, Design Manual No. 3, The Canadian Network of Centers of Excellence on Intelligent Sensing for Innovative Structures, University of Manitoba, Winnipeg, Canada, 2001, Edited by J. Zukewich.
  25. D. H. Deitz, I. E. Harik, and H. Gesund, “One-way slabs reinforced with glass fiber reinforced polymer reinforcing bars,” in Proceedings of the 4th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, vol. 188, pp. 279–286, ACI Special Publication, Baltimore, Md, USA, 1999.
  26. CNR Advisory Committee on Technical Recommendations for Design and Construction, “Guide for the design and construction of concrete structures reinforced with fiber reinforced polymer bars,” Tech. Rep. CNR-DT-203/2006, CNR, Rome, Italy, 2006. View at Google Scholar
  27. N. A. Hoult, E. G. Sherwood, E. C. Bentz, and M. P. Collins, “Does the use of FRP reinforcement change the one-way shear behavior of reinforced concrete slabs?” Journal of Composites for Construction, vol. 12, no. 2, pp. 125–133, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. T. Zhang, D. J. Oehlers, and P. Visintin, “Shear strength of FRP RC beams and one-way slabs without stirrups,” Journal of Composites for Construction, vol. 18, no. 5, Article ID 04014007, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. M. S. Alam, Influence of different parameters on shear strength of FRP reinforced concrete beams without web reinforcement [Ph.D. dissertation], Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John's, Canada, 2010.
  30. A. Nilson, D. Darwin, and C. W. Dolan, Design of Concrete Structures, McGraw-Hill Higher Education, New York, NY, USA, 14th edition, 2008.
  31. E. Oller, A. Marí, J. M. Bairán, and A. Cladera, “Shear design of reinforced concrete beams with FRP longitudinal and transverse reinforcement,” Composites Part B: Engineering, vol. 74, pp. 104–122, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. ACI Committee 440, “Guide for the design and construction of concrete reinforced with FRP bars,” Tech. Rep. ACI 440.1R-03, ACI Committee, Farmington Hills, Mich, USA, 2003. View at Google Scholar
  33. American Concrete Institute (ACI), “Guide for the design and construction of concrete reinforced with FRP bars,” ACI 440.1 R-06, American Concrete Institute, Farmington Hills, Mich, USA, 2006. View at Google Scholar
  34. A. K. Tureyen and R. J. Frosch, “Concrete shear strength: another perspective,” ACI Structural Journal, vol. 100, no. 5, pp. 609–615, 2003. View at Google Scholar · View at Scopus
  35. ASCE-ACI Committee 445 on Shear and Torsion, “Recent approaches to shear design of structural concrete,” Journal of Structural Engineering, vol. 124, no. 12, pp. 1374–1417, 1998. View at Publisher · View at Google Scholar
  36. Canadian Standards Association (CSA), “Canadian highway bridge design code,” Tech. Rep. CSA S6-06, Missisauga, Canada, Canadian Standards Association, 2006. View at Google Scholar
  37. M. S. Alam and A. Hussein, “Experimental investigation on the effect of longitudinal reinforcement on shear strength of fibre reinforced polymer reinforced concrete beams,” Canadian Journal of Civil Engineering, vol. 38, no. 3, pp. 243–251, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. A. Marí, A. Cladera, E. Oller, and J. Bairán, “Shear design of FRP reinforced concrete beams without transverse reinforcement,” Composites Part B: Engineering, vol. 57, pp. 228–241, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. Canadian Standards Association (CSA), “Canadian highway bridge design code,” CSA S6-09, Canadian Standards Association, Missisauga, Canada, 2009. View at Google Scholar
  40. A. G. Razaqpur and O. B. Isgor, “Proposed shear design method for FRP-reinforced concrete members without stirrups,” ACI Structural Journal, vol. 103, no. 1, pp. 93–102, 2006. View at Google Scholar · View at Scopus
  41. J. R. Yost, S. P. Gross, and D. W. Dinehart, “Shear strength of normal strength concrete beams reinforced with deformed GFRP bars,” Journal of Composites for Construction, vol. 5, no. 4, pp. 268–275, 2001. View at Publisher · View at Google Scholar · View at Scopus
  42. A. K. El-Sayed, E. F. El-Salakawy, and B. Benmokrane, “Shear strength of FRP-reinforced concrete beams without transverse reinforcement,” ACI Structural Journal, vol. 103, no. 2, pp. 235–243, 2006. View at Google Scholar · View at Scopus
  43. M. Tariq and J. P. Newhook, “Shear testing of FRP reinforced concrete without transverse reinforcement,” in Proceedings of the Annual Conference of the Canadian Society for Civil Engineering, pp. 1330–1339, 2003.
  44. A. K. Tureyen and R. J. Frosch, “Shear tests of FRP-reinforced concrete beams without stirrups,” ACI Structural Journal, vol. 99, no. 4, pp. 427–434, 2002. View at Google Scholar · View at Scopus
  45. T. Alkhrdaji, M. Wideman, A. Belarbi, and A. Nanni, “Shear strength of GFRP RC beams and slabs,” in Proceedings of the International Conference on Composites in Construction, pp. 409–414, Porto, Portugal, October 2001.
  46. Y. Mizukawa, Y. Sato, T. Ueda, and Y. Kakuta, “A study on shear fatigue behavior of concrete beams with FRP rods,” in Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS '97), vol. 2, pp. 309–316, Japan Concrete Institute, Sapporo, Japan, 1997.
  47. W. Zhao, K. Maruyama, and H. Suzuki, “Shear behaviour of concrete beams reinforced by FRP rods as longitudinal and shear reinforcement,” in Proceedings of the 2nd International RILEM Symposium on Non Metallic (FRP) Reinforcement for Concrete Structures, pp. 352–359, Ghent, Belgium, 1995.
  48. S. Steiner, AK. El-Sayed, B. Benmokrane, F. Matta, and A. Nanni, “Shear strength of large-size concrete beams reinforced with glass FRP bars in,” in Proceedings of the 5nd International Conference on Advanced Composite Materials in Bridges and Structures, Winnipeg, Canada, September 2008.
  49. N. Duranovic, K. Pilakoutas, and P. Waldron, “Tests on concrete beams reinforced with glass fibre reinforced plastic bars,” in Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS '97), pp. 479–486, 1997.
  50. E. C. Bentz, L. Massam, and M. P. Collins, “Shear strength of large concrete members with FRP reinforcement,” Journal of Composites for Construction, vol. 14, no. 6, pp. 637–646, 2010. View at Publisher · View at Google Scholar · View at Scopus
  51. F. Matta, A. Nanni, N. Galati, and F. Mosele, “Size effect on shear strength of concrete beams reinforced with FRP bars,” in Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS '08), vol. 2, pp. 17–22, 2008.
  52. S. P. Gross, D. W. Dinehart, J. R. Yost, and P. M. Theisz, “Experimental tests of high-strength concrete beams reinforced with CFRP bars,” in Proceedings of the 4th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS '04), pp. 20–23, Calgary, Canada, 2004.
  53. H. Jang, M. Kim, J. Cho, and C. Kim, “Concrete shear strength of beams reinforced with FRP bars according to flexural reinforcement ratio and shear span to depth ratio,” in Proceedings of the 9th International Symposium of the Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS '09), Adelaide, Australia, 2009.
  54. S. Tottori and H. Wakui, Shear Capacity of RC and PC Beams Using FRP Reinforcement, vol. 138 of ACI Special Publication, 1993.
  55. H. Nakamura and T. Higai, “Evaluation of shear strength of the concrete beams reinforced with FRP,” Proceedings of Japan Society of Civil Engineers No. 508/V-26, 1995. View at Google Scholar
  56. L. Massam, The behaviour of GFRP reinforced concrete beams in shear [M.S. thesis], University of Toronto, Toronto, Canada, 2001.
  57. R. Liu and C. P. Pantelides, “Shear strength of GFRP reinforced precast lightweight concrete panels,” Construction and Building Materials, vol. 48, pp. 51–58, 2013. View at Publisher · View at Google Scholar · View at Scopus
  58. R. Bashir and A. Ashour, “Neural network modelling for shear strength of concrete members reinforced with FRP bars,” Composites Part B: Engineering, vol. 43, no. 8, pp. 3198–3207, 2012. View at Publisher · View at Google Scholar · View at Scopus
  59. M. S. Islam and S. Alam, “Principal component and multiple regression analysis for Steel Fiber Reinforced Concrete (SFRC) beams,” International Journal of Concrete Structures and Materials, vol. 7, no. 4, pp. 303–317, 2013. View at Publisher · View at Google Scholar · View at Scopus