Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 4894351, 9 pages
http://dx.doi.org/10.1155/2016/4894351
Research Article

Investigation on the Combined Effect of Fibers and Cement on the Mechanical Performance of Foamed Bitumen Mixtures Containing 100% RAP

Polytechnic University of Milan, 20133 Milan, Italy

Received 18 July 2016; Accepted 4 October 2016

Academic Editor: Charles C. Sorrell

Copyright © 2016 Ehsan Ashouri Taziani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Wirtgen Cold Recycling Technology Manual, Wirtgen, Windhagen, Germany, 1st edition, 2012.
  2. G. Martinez-Arguelles, F. Giustozzi, M. Crispino, and G. W. Flintsch, “Investigating physical and rheological properties of foamed bitumen,” Construction and Building Materials, vol. 72, pp. 423–433, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. E. Toraldo, E. Mariani, and M. Crispino, “Laboratory investigation into the effects of fibres and bituminous emulsion on cement-treated recycled materials for road pavements,” European Journal of Environmental and Civil Engineering, vol. 20, no. 7, pp. 725–736, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. G. Da Rios, E. Toraldo, and E. Mariani, “Increasing durability of recycled cement bound materials: laboratory investigation on the effects of bituminous emulsions,” in Proceedings of the 1st International Symposium on Life-Cycle Civil Engineering (IALCCE '08), pp. 137–142, Varenna, Italy, June 2008. View at Scopus
  5. A. Hamidi and M. Hooresfand, “Effect of fiber reinforcement on triaxial shear behavior of cement treated sand,” Geotextiles and Geomembranes, vol. 36, pp. 1–9, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Martinez-Arguelles, F. Giustozzi, M. Crispino, and G. W. Flintsch, “Laboratory investigation on mechanical performance of cold foamed bitumen mixes: bitumen source, foaming additive, fiber-reinforcement and cement effect,” Construction and Building Materials, vol. 93, pp. 241–248, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Muthen, Foamed Asphalt Mixes-Mix Design Procedure, SABITA Ltd & CSIR Transportek, 1998.
  8. Y. Kim and H. D. Lee, “Development of mix design procedure for cold in-place recycling with foamed asphalt,” Journal of Materials in Civil Engineering, vol. 18, no. 1, pp. 116–124, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. L. N. Mohammad, M. Y. Abu-Farsakh, Z. Wu, and C. Abadie, “Louisiana experience with foamed recycled asphalt pavement base materials,” Transportation Research Record, vol. 1832, pp. 17–24, 2003. View at Google Scholar · View at Scopus
  10. Y. Kim, H. D. Lee, and M. Heitzman, “Dynamic modulus and repeated load tests of cold in-place recycling mixtures using foamed asphalt,” Journal of Materials in Civil Engineering, vol. 21, no. 6, pp. 279–285, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Kuna, G. Airey, and N. Thorn, “Laboratory mix design procedure for foamed bitumen mixtures,” Transportation Research Record, vol. 2444, pp. 1–10, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Diefenderfer and A. Apeagyei, “Time-dependent structural response of full-depth reclamation,” Transportation Research Record, vol. 2253, pp. 3–9, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. P. Fu, D. Jones, J. T. Harvey, and F. A. Halles, “Investigation of the curing mechanism of foamed asphalt mixes based on micromechanics principles,” Journal of Materials in Civil Engineering, vol. 22, no. 1, Article ID 012001QMT, pp. 29–38, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Kim, S. Im, and H. D. Lee, “Impacts of curing time and moisture content on engineering properties of cold in-place recycling mixtures using foamed or emulsified asphalt,” Journal of Materials in Civil Engineering, vol. 23, no. 5, pp. 542–553, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Iwański and A. Chomicz-Kowalska, “Evaluation of the pavement performance,” Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 63, no. 1, pp. 97–105, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. S. M. Abtahi, M. Sheikhzadeh, and S. M. Hejazi, “Fiber-reinforced asphalt-concrete—a review,” Construction and Building Materials, vol. 24, no. 6, pp. 871–877, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Bonica, E. Toraldo, L. Andena, C. Marano, and E. Mariani, “The effects of fibers on the performance of bituminous mastics for road pavements,” Composites Part B: Engineering, vol. 95, pp. 76–81, 2016. View at Publisher · View at Google Scholar
  18. E. Toraldo, E. Mariani, and S. Malvicini, “Laboratory investigation into the effects of fibers on bituminous mixtures,” Journal of Civil Engineering and Management, vol. 21, no. 1, pp. 45–53, 2015. View at Publisher · View at Google Scholar
  19. B. D. S. Bueno, W. R. da Silva, D. C. de Lima, and E. Minete, “Engineering properties of fiber reinforced cold asphalt mixes,” Journal of Environmental Engineering, vol. 129, no. 10, pp. 952–955, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. E. Toraldo, G. Martinez-Arguelles, and E. Mariani, “Effect of reinforced fibers on stiffness of recycled asphalt half-warm emulsion mixes,” in Sustainability, Eco-Efficiency, and Conservation in Transportation Infrastructure Asset Management, pp. 53–59, CRC Press, 2014. View at Google Scholar
  21. Y. Kim and T.-S. Park, “Reinforcement of recycled foamed asphalt using short polypropylene fibers,” Advances in Materials Science and Engineering, vol. 2013, Article ID 903236, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. F. A. Halles and G. Z. Thenoux, “Degree of influence of active fillers on properties of recycled mixes with foamed asphalt,” Transportation Research Record, vol. 2095, pp. 127–135, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Chomicz-Kowalska and K. Maciejewski, “Multivariate optimization of recycled road base cold mixtures with foamed bitumen,” Procedia Engineering, vol. 108, pp. 436–444, 2015. View at Publisher · View at Google Scholar
  24. Review of Foamed Bitumen Stabilisation Mix Design Methods, Austroads, 2011.
  25. EN, “Bitumen and bituminous binders—determination of needle penetration,” EN 1426, Brussels, Belgium, European Committee for Standardization, 2007. View at Google Scholar
  26. EN, “Bituminous mixtures—test methods for hot mix asphalt—part 8: determination of void characteristics of bituminous specimens,” EN 12697-8, European Committee for Standardization, Brussels, Belgium, 2007. View at Google Scholar
  27. EN, “Bituminous mixtures—test methods for hot mix asphalt—part 6: determination of bulk density of bituminous specimens,” EN 12697-6, 2007, European Committee for Standardization, Brussels, Belgium, 2007. View at Google Scholar
  28. EN, “Bituminous mixtures—test methods for hot mix asphalt—Part 5: determination of the maximum density,” EN 12697-5, Brussels, Belgium, European Committee for Standardization, 2007. View at Google Scholar
  29. EN, “Bituminous mixtures—test methods for hot mix asphalt—part 26: stiffness,” EN 12697-26, European Committee for Standardization, Brussels, Belgium, 2007. View at Google Scholar
  30. EN, “Bituminous mixtures—Test methods for hot mix asphalt—part 24: resistance to fatigue,” EN 12697-24, Brussels, Belgium, European Committee for Standardization, 2007. View at Google Scholar
  31. EN, “Bituminous mixtures—test methods for hot mix asphalt—part 23: determination of the indirect tensile strength of bituminous specimens,” EN 12697-23, European Committee for Standardization, Brussels, Belgium, 2007. View at Google Scholar