Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 5163702, 8 pages
http://dx.doi.org/10.1155/2016/5163702
Research Article

Research on the Fracture Properties and Modification Mechanism of Polyester Fiber and SBR Latex Modified Cement Concrete

1State Key Laboratory of Silicate Building Materials, Wuhan University of Technology, Wuhan 430070, China
2Guizhou Building Material Quality Supervision Testing Center, Guiyang 550002, China

Received 16 November 2015; Accepted 19 April 2016

Academic Editor: Wei Liu

Copyright © 2016 Mingkai Zhou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Zhong and Z. Chen, “Properties of latex blends and its modified cement mortars,” Cement and Concrete Research, vol. 32, no. 10, pp. 1515–1524, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Zhong, M. Shi, and Z. H. Chen, “The AC response of polymer-coated mortar specimens,” Cement and Concrete Research, vol. 32, no. 6, pp. 983–987, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. W. Shen, L. Shan, T. Zhang, H. Ma, Z. Cai, and H. Shi, “Investigation on polymer-rubber aggregate modified porous concrete,” Construction and Building Materials, vol. 38, pp. 667–674, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Pellegrino, F. Da Porto, and C. Modena, “Rehabilitation of reinforced concrete axially loaded elements with polymer-modified cementicious mortar,” Construction and Building Materials, vol. 23, no. 10, pp. 3129–3137, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. D. V. Gemert, L. Czarnecki, M. Maultzsch et al., “Cement concrete and concrete-polymer composites: two merging worlds: a report from 11th ICPIC Congress in Berlin, 2004,” Cement and Concrete Composites, vol. 27, no. 9-10, pp. 926–933, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Pacheco-Torgal and S. Jalali, “Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes,” Construction and Building Materials, vol. 23, no. 12, pp. 3485–3491, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Do and Y. Soh, “Performance of polymer-modified self-leveling mortars with high polymer-cement ratio for floor finishing,” Cement and Concrete Research, vol. 33, no. 10, pp. 1497–1505, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Ollitrault-Fichet, C. Gauthier, and G. Clamen, “Micro structural aspect in a polymer-modified cement,” Cement and Concrete Research, vol. 28, no. 12, pp. 1687–1693, 1998. View at Publisher · View at Google Scholar
  9. R. Wang, X.-G. Li, and P.-M. Wang, “Influence of polymer on cement hydration in SBR-modified cement pastes,” Cement and Concrete Research, vol. 36, no. 9, pp. 1744–1751, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Shilang, Fracture Mechanics of Concrete, Science Press, 2001 (Chinese).
  11. G. Appa Rao and B. K. Raghu Prasad, “Fracture energy and softening behavior of high-strength concrete,” Cement and Concrete Research, vol. 32, no. 2, pp. 247–252, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. S. P. Shah and A. Carpinteri, “Fracture mechanics test method for concrete,” Report of RILEM FMT-89, Chapman & Hall, London, UK, 1991. View at Google Scholar