Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 6127624, 9 pages
http://dx.doi.org/10.1155/2016/6127624
Research Article

Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide

1Department of Mechanical Engineering, Sethu Institute of Technology, Kariapatti, Tamil Nadu, India
2Department of Mechanical Engineering, University College of Engineering, Anna University, Dindigul, Tamil Nadu, India
3Department of Mechanical Engineering, MAM School of Engineering, Trichy, Tamil Nadu, India

Received 1 September 2016; Accepted 12 October 2016

Academic Editor: Luigi Nicolais

Copyright © 2016 G. Pitchayyapillai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Poovazhagan, K. Kalaichelvan, A. Rajadurai, and V. Senthilvelan, “Characterization of hybrid silicon carbide and boron carbide nano particles reinforced aluminum alloy composites,” Procedia Engineering, vol. 64, pp. 681–689, 2013. View at Publisher · View at Google Scholar
  2. A. M. Al-Qutub, A. Khalil, N. Saheb, and A. S. Hakeem, “Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes,” Wear, vol. 297, no. 1-2, pp. 752–761, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Umanath, K. Palanikumar, and S. T. Selvamani, “Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites,” Composites Part B: Engineering, vol. 53, pp. 159–168, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Umanath, ST. Selvamani, and K. Palanikumar, “Friction and wear behaviour of Al6061alloy (SiCp/Alp) hybrid composite,” International Journal of Engineering Science and Technology, vol. 3, pp. 5441–5551, 2011. View at Google Scholar
  5. G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, and M. S. Bhagyashekar, “Studies on Al6061/SiC and Al7075/Al2O3 metal matrix composites,” Journal of Minerals Materials Characterization Engineering, vol. 9, pp. 454–461, 2010. View at Google Scholar
  6. H. C. Anilkumar, H. S. Hebbar, and K. S. Ravishankar, “Mechanical properties of fly ash reinforced aluminum alloy composites,” International Journal of Mechanical and Materials Engineering, vol. 6, pp. 225–233, 2011. View at Google Scholar
  7. M. Asif, K. Chandra, and P. S. Misra, “Development of aluminum based hybrid metal matrix composites for heavy duty applications,” Journal of Minerals and Materials Characterization and Engineering, vol. 10, pp. 115–134, 2011. View at Google Scholar
  8. D. Singh, H. Singh, S. Kumar, and G. Singh, “An Experimental investigation of Mechanical behaviour of aluminum by adding SiC and Alumina,” International Journal on Emerging Technologies, vol. 3, pp. 178–184, 2012. View at Google Scholar
  9. V. N. Gaitonde1, S. R. Karnik, and M. S. Jayaprakash, “Some studies on wear and corrosion properties of Al5083/Al2O3/graphite hybrid composites,” Journal of Minerals and Materials Characterization and Engineering, vol. 11, pp. 695–703, 2012. View at Google Scholar
  10. R. Sharanabasappa and B. S. Motgi, “A study on mechanical properties of fly ash and alumina reinforced aluminum alloy (LM25) composites,” IOSR Journal of Mechanical and Civil Engineering, vol. 7, pp. 14–21, 2013. View at Google Scholar
  11. D. Kuma and J. Singh, “Comparative Investigation of Mechanical Properties of aluminum based hybrid metal matrix composites,” International Journal of Engineering Research and Applications, vol. 1, pp. 31–36, 2014. View at Google Scholar
  12. C. C. Wang and B. H. Yan, “Blind-hole drilling of Al2O3/6061Al composite using rotary electro-discharge machining,” Journal of Materials Processing Technology, vol. 102, no. 1, pp. 90–102, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. B. H. Yan and C. C. Wang, “Machining characteristics of Al2O3/6061 Al composite using rotary electro-discharge machining with a tube electrode,” Journal of Materials Processing Technology, vol. 95, no. 1–3, pp. 222–231, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. B. H. Yan, C. C. Wang, W. D. Liu, and F. Y. Huang, “Machining characteristics of Al2O3/6061Al composite using rotary EDM with a disklike electrode,” International Journal of Advanced Manufacturing Technology, vol. 16, no. 5, pp. 322–333, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. G. B. Veeresh Kumar, C. S. P. Rao, N. Several, and M. S. Bhagyshekar, “Studies on A16061-SiC and Al7075-Al2O3 metal matrix composites,” Journal of Minerals and Materials Characterization & Engineering, vol. 9, pp. 43–55, 2010. View at Google Scholar
  16. Y. Sahin, M. Kok, and H. Celik, “Tool wear and surface roughness of Al2O3 particle-reinforced aluminium alloy composites,” Journal of Materials Processing Technology, vol. 128, no. 1–3, pp. 280–291, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. J. P. Davim, “Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays,” Journal of Materials Processing Technology, vol. 132, no. 1–3, pp. 340–344, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Kiliçkap, O. Çakir, M. Aksoy, and A. Inan, “Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite,” Journal of Materials Processing Technology, vol. 164-165, pp. 862–867, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Metin Kok, “A study on the machinability of Al2O3 particle reinforced aluminum alloy composite,” in Proceedings of the 11th Inorganic Bonded Fiber Composites Conference, vol. 1, pp. 272–281, Madrid, Spain, November 2008.
  20. C. A. Brown and M. K. Surappa, “The machinability of a cast aluminium alloy-graphite particle composite,” Materials Science and Engineering, vol. 102, no. 1, pp. 31–37, 1988. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Kök and K. Özdin, “Wear resistance of aluminium alloy and its composites reinforced by Al2O3 particles,” Journal of Materials Processing Technology, vol. 183, no. 2-3, pp. 301–309, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Kato, M. Takama, Y. Iwai, K. Washida, and Y. Sasaki, “Wear and mechanical properties of sintered copper-in composites containing graphite or molybdenum disulfide,” Wear, vol. 255, no. 1–6, pp. 573–578, 2003. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Baradeswaran, S. C. Vettivel, A. Elaya Perumal, N. Selvakumar, and R. Franklin Issac, “Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites,” Materials and Design, vol. 63, pp. 620–632, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Baradeswaran and A. Elaya Perumal, “Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites,” Composites Part B: Engineering, vol. 56, pp. 464–471, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Mahdavi and F. Akhlaghi, “Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method,” Tribology Letters, vol. 44, no. 1, pp. 1–12, 2011. View at Publisher · View at Google Scholar · View at Scopus