Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 6728237, 8 pages
Research Article

Investigation of Mechanical and Wear Properties of LM24/Silicate/Fly Ash Hybrid Composite Using Vortex Technique

1Department of Mechanical Engineering, Nehru Institute of Engineering and Technology, Coimbatore, Tamil Nadu 641008, India
2Department of Mechanical Engineering, SNS College of Technology, Coimbatore, Tamil Nadu 641107, India
3Department of Mechanical Engineering, Nadar Saraswathi College of Engineering and Technology, Theni 625531, India

Received 29 December 2015; Revised 27 April 2016; Accepted 17 May 2016

Academic Editor: Pavel Lejcek

Copyright © 2016 B. R. Senthil Kumar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Basavarajappa, G. Chandramohan, K. Mukund, M. Ashwin, and M. Prabu, “Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites,” Journal of Materials Engineering and Performance, vol. 15, no. 6, pp. 668–674, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. H. S. Anilkumar, H. S. Hebbar, and K. S. Ravishankar, “Mechanical properties of fly ash reinforced aluminum alloy composites,” International Journal of Mechanical and Materials Engineering, vol. 6, pp. 41–45, 2011. View at Google Scholar
  3. V. C. Uvaraja, N. Natarajan, K. Sivakumar, S. Jegadheeshwaran, and S. Sudhakar, “Tribological behavior of heat treated Al 7075 aluminium metal matrix composites,” Indian Journal of Engineering & Materials Sciences, vol. 22, pp. 51–61, 2014. View at Google Scholar
  4. F. Q. Hu, F. Y. Cao, B. Y. Song et al., “Surface properties of SiCp/Al composite by powder-mixed EDM,” in Proceedings of the 17th CIRP Conference on Electro Physical and Chemical Machining (ISEM '13), pp. 101–106, April 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Kuc and J. Cebulski, “Plastic behavior and microstructure characterization high manganese aluminium alloyed steel for the automotive industry,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 51, no. 1, pp. 14–21, 2012. View at Google Scholar
  6. K. M. Patel, P. M. Pandey, and P. Venkateswara Rao, “Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite,” International Journal of Refractory Metals & Hard Materials, vol. 27, no. 5, pp. 892–899, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Mitrovic, M. Babic, F. Zivic, I. Bobic, and D. Dzunic, “Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles,” Tribology in Industry, vol. 30, pp. 33–39, 2008. View at Google Scholar
  8. G. Ranganath, S. C. Sharma, and M. Krishna, “Dry sliding wear of garnet reinforced zinc/aluminium metal matrix composites,” Wear, vol. 251, no. 1-12, pp. 1408–1413, 2001. View at Publisher · View at Google Scholar
  9. K. Ravi Kumar, K. M. Mohanasundaram, G. Arumaikkannu, and R. Subramanian, “Analysis of parameters influencing wear and frictional behavior of aluminum-fly ash composites,” Tribology Transactions, vol. 55, no. 6, pp. 723–729, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Sulardjaka and M. W. Wildan, “Wear resistance of carbothermally reduced of fly ash reinforced aluminum composite,” International Journal of Mechanical & Mechatronics Engineering, vol. 10, pp. 15–21, 2010. View at Google Scholar
  11. S. Gopalakannan, T. Senthilvelan, and S. Ranganathan, “Statistical optimization of EDM parameters on machining of aluminum Hybrid Metal Matrix composite by applying Taguchi based Grey analysis,” Journal of Scientific and Industrial Research, vol. 72, no. 6, pp. 358–365, 2013. View at Google Scholar · View at Scopus
  12. R. Karthikeyan, Analysis and optimization of machining characteristics of AI/SiC particulate composites [Ph.D. thesis], Annamalai University, Chidambaram, India, 1999.
  13. M. G. Anantha Prasad and B. Nityanand, “Study of microstructure and mechanical behavior of aluminum/garnet/carbon hybrid metal matrix composites fabricated by chill casting method,” Journal of Materials Science and Chemical Engineering, vol. 3, no. 3, pp. 1–8, 2014. View at Google Scholar
  14. N. Radhika, R. Subramanian, and P. S. Venkat, “Tribological behavior of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi's techniques,” Journal of Minerals and Material Characterization and Engineering, vol. 10, no. 5, pp. 427–443, 2011. View at Publisher · View at Google Scholar
  15. D. Kumar, H. Roy, and B. K. Show, “Tribological behavior of an aluminum matrix composite with Al4SiC4 reinforcement under dry sliding condition,” Tribology Transactions, vol. 58, no. 3, pp. 518–526, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Sivakumar, K. P. Padmanaban, and M. Uthayakumar, “Wear behavior of the Al (LM24)-garnet particulate composites under dry sliding conditions,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 228, no. 12, pp. 1410–1420, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Palanikumar, T. Sasimurugan, and N. Manogaran, “Optimization of machining characteristics of aluminum silicon carbide composites using Taguchi technique,” in Proceedings of the International Conference on Advances in Materials, Product Design and Manufacturing Systems (ICMPM '05), pp. 772–778, Tamil Nadu, India, 2005.
  18. J. Paulo Davim, “Study of drilling metal-matrix composites based on the Taguchi techniques,” Journal of Materials Processing Technology, vol. 132, no. 1–3, pp. 250–254, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Manna and B. Bhattacharayya, “A study on machinability of Al/SiC-MMC,” Journal of Materials Processing Technology, vol. 140, no. 1–3, pp. 711–716, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Tosun and M. Muratoglu, “The drilling of Al/SiCp metal-matrix composites. Part II: workpiece surface integrity,” Composites Science and Technology, vol. 64, no. 10-11, pp. 1413–1418, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. Sudarshan and M. K. Surappa, “Synthesis of fly ash particle reinforced A356 Al composites and their characterization,” Materials Science and Engineering A, vol. 480, no. 1-2, pp. 117–124, 2008. View at Publisher · View at Google Scholar · View at Scopus