Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 6792731, 6 pages
http://dx.doi.org/10.1155/2016/6792731
Research Article

Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System

1Department of Civil Engineering, University Malaysia Sarawak, 94300 Samarahan, Sarawak, Malaysia
2Department of Mechanical and Manufacturing Engineering, University Malaysia Sarawak, 94300 Samarahan, Sarawak, Malaysia

Received 20 March 2016; Accepted 11 August 2016

Academic Editor: Sverak Tomas

Copyright © 2016 R. Ahmadi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Zarina, A. M. M. Mustafa Al-Bakri, H. Kamarudin, I. K. Nizar, and A. R. Rafiza, “Review on the various ash from palm oil waste as geopolymer material,” Reviews on Advanced Materials Science, vol. 34, no. 1, pp. 37–43, 2013. View at Google Scholar · View at Scopus
  2. N. Abdullah and F. Sulaiman, “The oil palm wastes in Malaysia,” in Biomass Now-Sustainable Growth and Use, M. D. Matovic, Ed., chapter 3, pp. 75–100, InTech, Rijeka, Croatia, 2013, http://www.intechopen.com/books/biomass-now-sustainable-growth-and-use/the-oil-palm-wastes-in-malaysia. View at Google Scholar
  3. J.-H. Tay and K.-Y. Show, “Utilization of ashes from oil-palm wastes as a cement replacement material,” Water Science and Technology, vol. 34, no. 11, pp. 185–192, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Abdullah, M. W. Hussin, F. Zakaria, R. Muhamad, and Z. Abdul Hamid, “POFA: a potential partial cement replacement material in aerated concrete,” in Proceedings of the 6th Asia Pacific Structural Engineering and Construction, Kuala Lumpur, Malaysia, 2006.
  5. N. M. Altwair, M. Azmi, M. Johari, and S. F. S. Hashim, “Strength activity index and microstructural characteristics of treated palm oil fuel ash,” International Journal of Civil and Environmental Engineering, vol. 11, no. 5, pp. 85–92, 2011. View at Google Scholar
  6. A. S. M. Abdul Awal and M. Warid Hussin, “Effect of palm oil fuel ash in controlling heat of hydration of concrete,” Procedia Engineering, vol. 14, pp. 2650–2657, 2011. View at Publisher · View at Google Scholar
  7. N. M. Altwair and S. Kabir, “Palm Oil Fuel Ash (POFA): an environmentally-friendly supplemental cementitious material for concrete production,” in Proceedings of the International RILEM Conference on Material Science, W. Brameshuber, Ed., pp. 113–126, RILEM Publications SARL, 2010.
  8. N. Zainudin, R. Ahmadi, and M. D. Mannan, “Production of micro fine size Palm Oil Fuel Ash (POFA) pozzolan using wind tunnel production system,” in Proceedings of the MATEC, 2015.
  9. M. H. Ahmad, R. C. Omar, M. A. Malek, M. N. Nor, and S. Thiruselvam, “Compressive strength of palm oil fuel ash concrete,” in Proceedings of the International Conference on Construction and Building Technology (ICCBT '08), pp. 297–306, Kuala Lumpur, Malaysia, June 2008.
  10. V. M. Sooraj, “Effect of palm oil fuel ash (POFA) on strength properties of concrete,” International Journal of Scientific & Technology Research, vol. 3, no. 6, pp. 1–7, 2013. View at Google Scholar
  11. M. W. Hussin, A. I. Mohamed, A. Budiea, and K. Muthusamy, “Durability of high strength concrete containing palm oil fuel ash of different fineness,” Malaysia Journal of Civil Engineering, vol. 21, no. 2, pp. 180–194, 2009. View at Google Scholar
  12. W. Kroehong, T. Sinsiri, and C. Jaturapitakkul, “Effect of palm oil fuel ash fineness on packing effect and pozzolanic eaction of blended cement paste,” Procedia Engineering, vol. 14, pp. 361–369, 2011. View at Publisher · View at Google Scholar
  13. M. A. M. Johari, A. M. Zeyad, N. M. Bunnori, and K. S. Ariffin, “Engineering and transport properties of high-strength green concrete containing high volume of ultrafine palm oil fuel ash,” Construction and Building Materials, vol. 30, pp. 281–288, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. N. Ranjbar, M. Mehrali, A. Behnia, U. J. Alengaram, and M. Z. Jumaat, “Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar,” Materials and Design, vol. 59, pp. 532–539, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Joglekar and R. M. Mourya, “Design, construction and testing open circuit low speed wind tunnel,” International Journal of Engineering Research and Reviews, vol. 2, no. 4, pp. 1–9, 2014. View at Google Scholar
  16. T. T. Ghebrab, Development of Structure-Property Relationships for Hydrated Cement Paste, Mortar and Concrete, ProQuest, 2008.
  17. A. A. Ramezanianpour, “Fly ash,” in Cement Replacement Materials: Properties, Durability, Sustainability, Springer Geochemistry/Mineralogy, pp. 47–156, Springer, New York, NY, USA, 2014. View at Publisher · View at Google Scholar
  18. H. U. Jamo, M. Z. Noh, and Z. A. Ahmad, “Structural analysis and surface morphology of a tretaed palm oil fuel ash,” in Proceedings of the Seminar Kebangsaan Aplikasi Sains dan Matematik (SKASM '13), pp. 65–70, Batu Pahat, Malaysia, 2013.