Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 7372132, 14 pages
http://dx.doi.org/10.1155/2016/7372132
Research Article

Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts

1Department of Mechanical Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia

Received 7 December 2015; Revised 3 March 2016; Accepted 6 March 2016

Academic Editor: Fernando Lusquiños

Copyright © 2016 Adel Taha Abbas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Adel Taha Abbas, Adham Ezzat Ragab, Essam Ali Al Bahkali, and Ehab Adel El Danaf, “Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts,” Advances in Materials Science and Engineering, vol. 2016, Article ID 7372132, 14 pages, 2016. https://doi.org/10.1155/2016/7372132.