Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 7372132, 14 pages
http://dx.doi.org/10.1155/2016/7372132
Research Article

Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts

1Department of Mechanical Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia

Received 7 December 2015; Revised 3 March 2016; Accepted 6 March 2016

Academic Editor: Fernando Lusquiños

Copyright © 2016 Adel Taha Abbas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. V. M. K. Raju, G. R. Janardhana, P. N. Kumar, and V. D. P. Rao, “Optimization of cutting conditions for surface roughness in CNC end milling,” International Journal of Precision Engineering and Manufacturing, vol. 12, no. 3, pp. 383–391, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. D. Y. Pimenov, “Experimental research of face mill wear effect to flat surface roughness,” Journal of Friction and Wear, vol. 35, no. 3, pp. 250–254, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Pusavec, A. Deshpande, S. Yang et al., “Sustainable machining of high temperature Nickel alloy—Inconel 718: part 2—chip breakability and optimization,” Journal of Cleaner Production, vol. 87, pp. 941–952, 2015. View at Google Scholar
  4. C. Felho and J. Kundrak, “CAD-based modelling of surface roughness in face milling,” International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, vol. 8, no. 5, pp. 814–818, 2014. View at Google Scholar
  5. S. Rawangwong, J. Chatthong, R. Burapa, and W. Boonchouytan, “An investigation of optimum cutting conditions in face milling semi-solid AA 7075 using carbide tool,” International Journal of Innovation, Management and Technology, vol. 3, no. 6, pp. 692–696, 2012. View at Publisher · View at Google Scholar
  6. T. Kivak, “Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts,” Measurement, vol. 50, no. 1, pp. 19–28, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Rawangwong, J. Chatthong, J. Rodjananugoon, R. Burapa, and W. Boonchouytan, “An investigation of optimum cutting conditions in face milling nodular cast iron FCD 400 using carbide tool,” International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 4, pp. 309–313, 2013. View at Google Scholar
  8. A. T. M. Abbas, “Comparative assessment of wiper and conventional carbide inserts on surface roughness in the turning of high strength steel,” Journal of Materials Science Research, vol. 5, no. 1, pp. 32–45, 2015. View at Publisher · View at Google Scholar
  9. Y. Zhang and K. Chou, “A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 222, no. 8, pp. 959–967, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Fydrych and G. Rogalski, “Effect of shielded-electrode wet welding conditions on diffusion hydrogen content in deposited metal,” Welding International, vol. 25, no. 3, pp. 166–171, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Ding, S. Zhang, Y. Wang, and X. Zhu, “Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel,” International Journal of Advanced Manufacturing Technology, vol. 51, no. 1, pp. 45–55, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, 2013.