Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 8219437, 9 pages
http://dx.doi.org/10.1155/2016/8219437
Research Article

Olive Stone Ash as Secondary Raw Material for Fired Clay Bricks

1Department of Chemical, Environmental, and Materials Engineering, Advanced Polytechnic School of Jaén, University of Jaén, Campus Las Lagunillas s/n, 23071 Jaén, Spain
2International University of La Rioja, Avenida La Paz, No. 137, Logroño, 26002 La Rioja, Spain
3Department of Inorganic Chemistry, Crystallography and Mineralogy, Affiliate Unit of the ICP-CSIC, Faculty of Sciences, University of Málaga, Campus de Teatinos, 29071 Málaga, Spain

Received 5 September 2016; Revised 9 November 2016; Accepted 27 November 2016

Academic Editor: Kaveh Edalati

Copyright © 2016 D. Eliche-Quesada et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Food and Agriculture Organization of the United Nations. Statistics Division, 2016, http://faostat3.fao.org/browse/Q/QC/E.
  2. Ministerio de Agricultura, Alimentación y Medio Ambiente. Gobierno de España. Estadísticas, 2016, http://www.magrama.gob.es/es/estadistica/temas/estadisticas-agrarias/agricultura/superficies-producciones-anuales-cultivos/.
  3. Ministerio de Agricultura, Alimentación y Medio Ambiente, Gobierno de España, Encuesta sobre Superficies y Rendimientos, 2013.
  4. Agencia Andaluza de la Energía (AAE), La biomasa en Andalucía, 2015, https://www.agenciaandaluzadelaenergia.es/sites/default/files/3_2_0161_15_la_biomasa_en_andalucia_octubre_2015.pdf.
  5. Junta de Andalucía Biomasa Forestal en Andalucía, 1. Modelos de existencias, crecimiento y producción, Coníferas, 2012, http://www.juntadeandalucia.es/medioambiente/portal_web/web/temas_ambientales/montes/usos_y_aprov/jornadas_biomasa/Publicaciones/biomasa1.pdf.
  6. M. C. Trujillo, M. A. Martín-Lara, A. B. Albadarin, C. Mangwandi, and M. Calero, “Simultaneous biosorption of methylene blue and trivalent chromium onto olive stone,” Desalination and Water Treatment, vol. 57, no. 37, pp. 17400–17410, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Larous and A. Meniai, “Adsorption of Diclofenac from aqueous solution using activated carbon prepared from olive stones,” International Journal of Hydrogen Energy, vol. 41, no. 24, pp. 10380–10390, 2016. View at Publisher · View at Google Scholar
  8. A. Erto, B. Tsyntsarski, M. Balsamo et al., “Synthesis of activated carbons by thermal treatments of agricultural wastes for CO2 capture from flue gas,” Combustion Science and Technology, vol. 188, no. 4-5, pp. 581–593, 2016. View at Publisher · View at Google Scholar
  9. M. Balsamo, B. Tsyntsarski, A. Erto et al., “Dynamic studies on carbon dioxide capture using lignocellulosic based activated carbons,” Adsorption, vol. 21, no. 8, pp. 633–643, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Moreno, Á. Caballero, J. Morales, and E. Rodríguez-Castellón, “Improved performance of electrodes based on carbonized olive stones/S composites by impregnating with mesoporous TiO2 for advanced Li—S batteries,” Journal of Power Sources, vol. 313, pp. 21–29, 2016. View at Publisher · View at Google Scholar
  11. N. Moreno, A. Caballero, L. Hernán, and J. Morales, “Lithium-sulfur batteries with activated carbons derived from olive stones,” Carbon, vol. 70, pp. 241–248, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Rodríguez, A. Lama, R. Rodríguez, A. Jiménez, R. Guillén, and J. Fernández-Bolaños, “Olive stone an attractive source of bioactive and valuable compounds,” Bioresource Technology, vol. 99, no. 13, pp. 5261–5269, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Arezki, N. Chelouah, and A. Tahakourt, “The effect of the addition of ground olive stones on the physical and mechanical properties of clay bricks,” Materiales de Construcción, vol. 66, no. 322, article no. e082, 2016. View at Publisher · View at Google Scholar
  14. S. Serrano, C. Barreneche, and L. F. Cabeza, “Use of by-products as additives in adobe bricks: mechanical properties characterisation,” Construction and Building Materials, vol. 108, pp. 105–111, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. Decisión de la Comisión 2000/532/CE sobre lista de residuos, DO L nº 226, 6.9.2000 modificada por Decisiones 2001/118/CE, 2001/119/CE y 2001/573/CE y rectificada por DO L nº 112, 27.4.2002, http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:32000D0532:ES:HTML.
  16. D. Vamvuka, “Comparative fixed/fluidized bed experiments for the thermal behaviour and environmental impact of olive kernel ash,” Renewable Energy, vol. 34, no. 1, pp. 158–164, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Ravaglioli, C. Fiori, and B. Fabbri, Materie Prime Ceramiche. Argille, Materiali non Argillosi e Sottoprodotti Industriali, Faenza Editrice S.P.A. Faenza, 1989.
  18. L. Sánchez-Muñoz and J. B. Carda Castelló, “Materiales residuales,” in De Materias Primas y Aditivos Cerámicos, F. E. Iberica and S. L. Castellón, Eds., pp. 159–160, 2002. View at Google Scholar
  19. A. A. Kadir, N. A. Mohd Zahari, and N. Azizi Mardi, “Utilization of palm oil waste into fired clay brick,” Advances in Environmental Biology, vol. 7, no. 12, pp. 3826–3834, 2013. View at Google Scholar · View at Scopus
  20. C.-L. Hwang and T.-P. Huynh, “Investigation into the use of unground rice husk ash to produce eco-friendly construction bricks,” Construction and Building Materials, vol. 93, pp. 335–341, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Janbuala and T. Wasanapiarnpong, “Effect of rice husk and rice husk ash on properties of lightweight clay bricks,” Key Engineering Materials, vol. 659, pp. 74–79, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. S. M. Kazmi, S. Abbas, M. A. Saleem, M. J. Munir, and A. Khitab, “Manufacturing of sustainable clay bricks: utilization of waste sugarcane bagasse and rice husk ashes,” Construction and Building Materials, vol. 120, pp. 29–41, 2016. View at Publisher · View at Google Scholar
  23. Z. Haiying, Z. Youcai, and Q. Jingyu, “Utilization of municipal solid waste incineration (MSWI) fly ash in ceramic brick: product characterization and environmental toxicity,” Waste Management, vol. 31, no. 2, pp. 331–341, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. K. L. Lin, “Feasibility study of using brick made from municipal solid waste incinerator fly ash slag,” Journal of Hazardous Materials, vol. 137, no. 3, pp. 1810–1816, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Smol, J. Kulczycka, A. Henclik, K. Gorazda, and Z. Wzorek, “The possible use of sewage sludge ash (SSA) in the construction industry as a way towards a circular economy,” Journal of Cleaner Production, vol. 95, pp. 45–54, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. P. Pavšič, A. Mladenovič, A. Mauko et al., “Sewage sludge/biomass ash based products for sustainable construction,” Journal of Cleaner Production, vol. 67, pp. 117–124, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. D. Eliche-Quesada and J. Leite-Costa, “Use of bottom ash from olive pomace combustion in the production of eco-friendly fired clay bricks,” Waste Management, vol. 48, pp. 323–333, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. C. Fernández-Pereira, J. A. De La Casa, A. Gómez-Barea, F. Arroyo, C. Leiva, and Y. Luna, “Application of biomass gasification fly ash for brick manufacturing,” Fuel, vol. 90, no. 1, pp. 220–232, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. J. A. de la Casa and E. Castro, “Recycling of washed olive pomace ash for fired clay brick manufacturing,” Construction and Building Materials, vol. 61, pp. 320–326, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Pérez-Villarejo, D. Eliche-Quesada, F. J. Iglesias-Godino, C. Martínez-García, and F. A. Corpas-Iglesias, “Recycling of ash from biomass incinerator in clay matrix to produce ceramic bricks,” Journal of Environmental Management, vol. 95, supplement, pp. S349–S354, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. “Test method for drying and firing shrinkage of ceramic whiteware clays,” ASTM C 326, American Society for Testing and Materials, 1997.
  32. “Test method for water absorption, bulk density, apparent porosity, and apparent specific gravity of fired whiteware products,” ASTM C373, American Society for Testing and Materials, 1994.
  33. “Methods of test for masonry units—part 11: determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units,” UNE-EN 772-11, 2011.
  34. “Methods of test for masonry units—part 1: determination of compressive strength,” UNE EN 772-1, 2011.
  35. U.S. Environmental Protection Agency, Method 13–11 Toxicity Characteristics Leaching Procedure (TCLP), vol. 51, Federal Register, Washington, DC, USA, 1992.
  36. A. Demirbas, “Potential applications of renewable energy sources, biomass combustion problems in boiler power systems and combustion related environmental issues,” Progress in Energy and Combustion Science, vol. 31, no. 2, pp. 171–192, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. O. Dahl, H. Nurmesniemi, R. Pöykiö, and G. Watkins, “Comparison of the characteristics of bottom ash and fly ash from a medium-size (32 MW) municipal district heating plant incinerating forest residues and peat in a fluidized-bed boiler,” Fuel Processing Technology, vol. 90, no. 7-8, pp. 871–878, 2009. View at Publisher · View at Google Scholar · View at Scopus
  38. J. García-Ten, M. J. Orts, A. Saburit, and G. Silva, “Thermal conductivity of traditional ceramics: part II: Influence of mineralogical composition,” Ceramics International, vol. 36, no. 7, pp. 2017–2024, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. I. J. Fernandes, D. Calheiro, A. G. Kieling et al., “Characterization of rice husk ash produced using different biomass combustion techniques for energy,” Fuel, vol. 165, pp. 351–359, 2016. View at Publisher · View at Google Scholar · View at Scopus
  40. H. He, Q. Yue, Y. Su et al., “Preparation and mechanism of the sintered bricks produced from Yellow River silt and red mud,” Journal of Hazardous Materials, vol. 203-204, pp. 53–61, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. “Standard test methods for sampling and testing brick and structural clay tile,” ASTM C67-14, 2014.
  42. “Standard specification for building brick (solid masonry units made from clay or shale),” ASTM C62-10, ASTM International, West Conshohocken, Pa, USA, 2010.
  43. W. M. Carty and U. Senapati, “Porcelain—raw materials, processing, phase evolution, and mechanical behavior,” Journal of the American Ceramic Society, vol. 81, no. 1, pp. 3–20, 1998. View at Publisher · View at Google Scholar · View at Scopus