Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 8918253, 8 pages
http://dx.doi.org/10.1155/2016/8918253
Research Article

Determination of the Mechanical Properties of Friction Welded Tube Yoke and Tube Joint

1The Graduate School of Natural and Applied Sciences, Dokuz Eylül University, 35397 Izmir, Turkey
2Tirsan Kardan A.Ş., 45030 Manisa, Turkey
3Faculty of Engineering, Dokuz Eylül University, 35397 Izmir, Turkey

Received 27 April 2016; Revised 18 June 2016; Accepted 27 June 2016

Academic Editor: Guru P. Dinda

Copyright © 2016 Efe Işık and Çiçek Özes. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Kimura, K. Seo, M. Kusaka, and A. Fuji, “Observation of joining phenomena in friction stage and improving friction welding method,” JSME International Journal Series A Solid Mechanics and Material Engineering, vol. 46, no. 3, pp. 384–390, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Kimura, M. Choji, M. Kusaka, K. Seo, and A. Fuji, “Effect of friction welding conditions and aging treatment on mechanical properties of A7075-T6 aluminium alloy friction joints,” Science and Technology of Welding and Joining, vol. 10, no. 4, pp. 406–412, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Kimura, M. Kusaka, K. Seo, and A. Fuji, “Improving joint properties of friction welded joint of high tensile steel,” JSME International Journal, Series A: Solid Mechanics and Material Engineering, vol. 48, no. 4, pp. 399–405, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Şahin, H. E. Akata, and T. Gulmez, “Characterization of mechanical properties in AISI 1040 parts welded by friction welding,” Materials Characterization, vol. 58, no. 10, pp. 1033–1038, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Kimura, Y. Saitoh, M. Kusaka, K. Kaizu, and A. Fuji, “Effect of friction welding condition and weld faying surface properties on tensile strength of friction welded joint between pure titanium and pure copper,” Journal of Solid Mechanics and Materials Engineering, vol. 5, no. 12, pp. 849–865, 2011. View at Publisher · View at Google Scholar
  6. M. Kimura, M. Kusaka, K. Kaizu, and A. Fuji, “Effect of friction welding condition on joining phenomena and tensile strength of friction welded joint between pure copper and low carbon steel,” Journal of Solid Mechanics and Materials Engineering, vol. 3, no. 2, pp. 187–198, 2009. View at Publisher · View at Google Scholar
  7. S. R. Divagar and M. M. Kumaran, “Joining the different materials using friction welding—a review,” International Journal of Mechanical Engineering and Robotics Research, vol. 4, no. 1, pp. 117–122, 2015. View at Google Scholar
  8. M. Şahin, “Joining with friction welding of high-speed steel and medium-carbon steel,” Journal of Materials Processing Technology, vol. 168, no. 2, pp. 202–210, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. N. Özdemir, “Investigation of the mechanical properties of friction-welded joints between AISI 304L and AISI 4340 steel as a function rotational speed,” Materials Letters, vol. 59, no. 19-20, pp. 2504–2509, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. V. V. Satyanarayana, G. M. Reddy, and T. Mohandas, “Dissimilar metal friction welding of austenitic-ferritic stainless steels,” Journal of Materials Processing Technology, vol. 160, no. 2, pp. 128–137, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Çelik and İ. Ersozlu, “Investigation of the mechanical properties and microstructure of friction welded joints between AISI 4140 and AISI 1050 steels,” Materials and Design, vol. 30, no. 4, pp. 970–976, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Mitelea, V. Budau, and C. Craciunescu, “Dissimilar friction welding of induction surface-hardened steels and thermochemically treated steels,” Journal of Materials Processing Technology, vol. 212, no. 9, pp. 1892–1899, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Ambroziak, M. Korzeniowski, P. Kustroń, M. Winnicki, P. Sokołowski, and E. Harapińska, “Friction welding of aluminium and aluminium alloys with steel,” Advances in Materials Science and Engineering, vol. 2014, Article ID 981653, 15 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. B. J. Eberhard, B. W. Schaaf Jr., and A. D. Wilson, “Friction weld ductility and toughness as influenced by inclusion morphology,” Welding Journal, vol. 16, no. 3, pp. 171–178, 1983. View at Google Scholar · View at Scopus
  15. K.-I. Ogawa, H. Nakayama, Y. Ohue, and A. Hasui, “Fatigue strength characteristics of S35C/S35C friction welded tubular butt joints,” Journal of the Society of Materials Science, vol. 37, no. 421, pp. 1209–1215, 1988. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Kimura, A. Ichihara, M. Kusaka, and K. Kaizu, “Joint properties and their improvement of AISI 310S austenitic stainless steel thin walled circular pipe friction welded joint,” Materials and Design, vol. 38, pp. 38–46, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. M. V. Kumar and V. Balasubramanian, “Microstructure and tensile properties of friction welded SUS 304HCu austenitic stainless steel tubes,” International Journal of Pressure Vessels and Piping, vol. 113, pp. 25–31, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Kawai, K. Ogawa, R. Tsujino, and H. Tokisue, “Statistical strength characteristics of aluminum alloy pipe and carbon steel pipe friction weld joints,” Journal of Japanese Society of Fracture Strength of Materials, vol. 33, no. 1, pp. 1–10, 1999 (Japanese). View at Google Scholar
  19. Y. Ohkuba, S. Iwamura, and H. Hatta, “Thermal analysis on friction welding of carbon steel tube and AA5154 aluminum tube,” Sumitomo Light Metal Technical Reports, vol. 48, no. 1, pp. 27–32, 2007 (Japanese). View at Google Scholar
  20. H.-S. Shin, J.-S. Park, and Y. Yokoyama, “Dissimilar friction welding of tubular Zr-based bulk metallic glasses,” Journal of Alloys and Compounds, vol. 504, supplement 1, pp. S275–S278, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Kimura, M. Kusaka, K. Kaizu, K. Nakata, and K. Nagatsuka, “Friction welding technique and joint properties of thin-walled pipe friction-welded joint between type 6063 aluminum alloy and AISI 304 austenitic stainless steel,” International Journal of Advanced Manufacturing Technology, vol. 82, no. 1, pp. 489–499, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. American Welding Society, “Recommended practices for friction welding,” ANSI/AWS C6.1-89, American Welding Society, Miami, Fla, USA, 1989. View at Google Scholar
  23. M. Kimura, A. Ichihara, M. Kusaka, and K. Kaizu, “Joint properties and their improvement of AISI 310S austenitic,” Materials & Design, vol. 38, pp. 38–46, 2012. View at Google Scholar
  24. K. K. Wang, “Friction welding,” Welding Research Council Bulletin, vol. 204, pp. 1–21, 1975. View at Google Scholar
  25. M. Maalekian, “Friction welding—critical assessment of literature,” Science and Technology of Welding and Joining, vol. 12, no. 8, pp. 738–759, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. N. S. Kalsi and V. S. Sharma, “A statistical analysis of rotary friction welding of steel with varying carbon in workpieces,” The International Journal of Advanced Manufacturing Technology, vol. 57, no. 9–12, pp. 957–967, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. 2016, http://www.reliasoft.com/Weibull/.
  28. J. H. Yan, X. L. Zheng, and K. Zhao, “Prediction of fatigue life and its probability distribution of notched friction welded joints under variable-amplitude loading,” International Journal of Fatigue, vol. 22, no. 6, pp. 481–494, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Masayoshi and K. Ryoma, “Fatigue properties of friction welded joints with flash by austenitic stainless steel and various machine part carbon steels,” Welding International, vol. 29, no. 1, pp. 10–17, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. K. Morikawa, Y. Ohue, K. Ogawa, and H. Nakayama, “Fatigue strength characteristics of A6061 aluminum alloy and S35C carbon steel friction welded joints,” in Proceedings of the 10th International Offshore and Polar Engineering Conference, J. S. Chung, Ed., vol. 1, pp. 145–149, Seattle, Wash, USA, June 2000. View at Scopus
  31. “Steel tubes for precision applications—technical delivery conditions—part 2: welded cold drawn tubes,” Tech. Rep. DIN EN 10305-2: 2010-05, Deutsches Institut für Normung, Berlin, Germany, 2010.