Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9710678, 12 pages
http://dx.doi.org/10.1155/2016/9710678
Research Article

Influence of Freeze-Thaw Damage on the Steel Corrosion and Bond-Slip Behavior in the Reinforced Concrete

1School of Civil Engineering and Architecture, Suqian College, Suqian 223800, China
2Department of Structural Engineering, Tongji University, Siping Road, Shanghai 200092, China
3College of Civil Engineering, Qingdao University of Technology, Fushun Road, Qingdao 266033, China

Received 21 March 2016; Revised 19 June 2016; Accepted 11 July 2016

Academic Editor: Akihiko Kimura

Copyright © 2016 Fangzhi Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Goszczyńska, G. Świt, W. Trampczyński, A. Krampikowska, J. Tworzewska, and P. Tworzewski, “Experimental validation of concrete crack identification and location with acoustic emission method,” Archives of Civil and Mechanical Engineering, vol. 12, no. 1, pp. 23–28, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. E. Raue, H.-G. Timmler, and R. Garke, “On the physically non-linear analysis of cyclic loaded reinforced concrete cross-sections with mathematical optimisation,” Journal of Civil Engineering and Management, vol. 15, no. 2, pp. 189–195, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. R. P. Khatri and V. Sirivivatnanon, “Methods for the determination of water permeability of concrete,” ACI Materials Journal, vol. 94, no. 3, pp. 257–261, 1997. View at Google Scholar · View at Scopus
  4. Z. Ma, T. Zhao, and Y. Zhao, “Effects of hydrostatic pressure on chloride ion penetration into concrete,” Magazine of Concrete Research, vol. 68, pp. 1–10, 2016. View at Publisher · View at Google Scholar
  5. Z. Ma, T. Zhao, J. Xiao, and P. Wang, “Effect of applied loads on water and chloride penetrations of strain hardening cement-based composites,” Journal of Materials in Civil Engineering, 2016. View at Publisher · View at Google Scholar
  6. P. J. M. Monteiro and K. E. Kurtis, “Time to failure for concrete exposed to severe sulfate attack,” Cement and Concrete Research, vol. 33, no. 7, pp. 987–993, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Kosior-Kazberuk, “Variations in fracture energy of concrete subjected to cyclic freezing and thawing,” Archives of Civil and Mechanical Engineering, vol. 13, no. 2, pp. 254–259, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Šelih, “Performance of concrete exposed to freezing and thawing in different saline environments,” Journal of Civil Engineering and Management, vol. 16, no. 2, pp. 306–311, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Q. Li, J. J. Zheng, W. Lawanwisut, and R. E. Melchers, “Concrete delamination caused by steel reinforcement corrosion,” Journal of Materials in Civil Engineering, vol. 19, no. 7, pp. 591–600, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Pradhan, “Corrosion behavior of steel reinforcement in concrete exposed to composite chloride-sulfate environment,” Construction and Building Materials, vol. 72, pp. 398–410, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-S. Choi, J.-G. Kim, and K.-M. Lee, “Corrosion behavior of steel bar embedded in fly ash concrete,” Corrosion Science, vol. 48, no. 7, pp. 1733–1745, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. T. D. Marcotte and C. M. Hansson, “Corrosion products that form on steel within cement paste,” Materials and Structures, vol. 40, no. 3, pp. 325–340, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Li, F. Li, A. Zdunek, E. Landis, and S. P. Shah, “Application of acoustic emission technique to detection of rebar corrosion in concrete,” ACI Materials Journal, vol. 95, no. 1, pp. 68–81, 1998. View at Google Scholar
  14. C. Andrade, C. Alonso, and F. J. Molina, “Cover cracking as a function of bar corrosion: Part I—experimental test,” Materials and Structures, vol. 26, no. 8, pp. 453–464, 1993. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. X. Zhao, J. Yu, B. Y. Hu, and W. L. Jin, “Crack shape and rust distribution in corrosion-induced cracking concrete,” Corrosion Science, vol. 55, pp. 385–393, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. G. K. Glass and N. R. Buenfeld, “The presentation of the chloride threshold level for corrosion of steel in concrete,” Corrosion Science, vol. 39, no. 5, pp. 1001–1013, 1997. View at Publisher · View at Google Scholar · View at Scopus
  17. C. G. Berrocal, K. Lundgren, and I. Löfgren, “Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: state of the art,” Cement and Concrete Research, vol. 80, pp. 69–85, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Coccia, S. Imperatore, and Z. Rinaldi, “Influence of corrosion on the bond strength of steel rebars in concrete,” Materials and Structures, vol. 49, no. 1-2, pp. 537–551, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Khanzadeh Moradllo, M. Shekarchi, and M. Hoseini, “Time-dependent performance of concrete surface coatings in tidal zone of marine environment,” Construction and Building Materials, vol. 30, pp. 198–205, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. W. Sun, R. Mu, X. Luo, and C. Miao, “Effect of chloride salt, freeze-thaw cycling and externally applied load on the performance of the concrete,” Cement and Concrete Research, vol. 32, no. 12, pp. 1859–1864, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. L. C. Wang and J. Z. Wang, “Mesoscale simulation of chloride diffusion in concrete subjected to flexural loading,” Advances in Structural Engineering, vol. 17, no. 4, pp. 561–572, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Yu, R. François, V. H. Dang, V. L'Hostis, and R. Gagné, “Development of chloride-induced corrosion in pre-cracked RC beams under sustained loading: effect of load-induced cracks, concrete cover, and exposure conditions,” Cement and Concrete Research, vol. 67, pp. 246–258, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Z. Mao, Z. Y. Zhang, and Z. M. Liu, “Damage analysis of concrete subjected to freeze-thaw cycles and chloride ion erosion,” Key Engineering Materials, vol. 488, pp. 464–467, 2012. View at Google Scholar
  24. Y. Xian, F. H. Wittmann, T. Zhao, and S. Giessler, “Chloride penetration into integral water repellent concrete/eindringen von chloriden in integral hydrophobierten beton,” Restoration of Buildings and Monuments, vol. 3, pp. 17–24, 2007. View at Google Scholar
  25. D. U. Ai-Ling, H. O. U. Wen-Tao, Z. He-Ming, and L. Jian-Qun, “The lineal polarization method for corrosion rate measurement of reinforcing bar of concrete in situ,” Electrochemistry, vol. 6, pp. 297–304, 2000. View at Google Scholar
  26. Y. Zhao, J. Dong, Y. Wu, H. Wang, X. Li, and Q. Xu, “Steel corrosion and corrosion-induced cracking in recycled aggregate concrete,” Corrosion Science, vol. 85, pp. 241–250, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. S. G. Millard, D. Law, J. H. Bungey, and J. Cairns, “Environmental influences on linear polarisation corrosion rate measurement in reinforced concrete,” NDT & E International, vol. 34, no. 6, pp. 409–417, 2001. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Li, G. Chen, G. Ji, and Y. Lu, “Quantitative damage evaluation of concrete suffered freezing-thawing by DIP technique,” Construction and Building Materials, vol. 69, pp. 177–185, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. L. Wang and T. Ueda, “Mesoscale modeling of chloride penetration in unsaturated concrete damaged by Freeze-Thaw cycling,” Journal of Materials in Civil Engineering, vol. 26, no. 5, pp. 955–965, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. Z. Wang, Q. Zeng, L. Wang, Y. Yao, and K. Li, “Corrosion of rebar in concrete under cyclic freeze-thaw and Chloride salt action,” Construction and Building Materials, vol. 53, pp. 40–47, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. J. Li, X. Peng, and Z. Deng, “Quantitative design on the frost-resistance of concrete,” Concrete, vol. 134, pp. 61–65, 2000 (Chinese). View at Google Scholar