Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3196509, 2 pages
https://doi.org/10.1155/2017/3196509
Editorial

Modern Engineered Materials and Technologies for Metal Forming Applications

1Department of Tool and Materials Engineering, King Mongkut’s University of Technology Thonburi, Bangkok 10140, Thailand
2School of Mechanical Engineering, Engineering Research Institute, Gyeongsang National University, No. 501, Jinju-daero, Jinju-si, Gyeongsangnam-do, Republic of Korea
3Luleå University of Technology, Luleå, Sweden

Correspondence should be addressed to Sutasn Thipprakmas; ht.ca.ttumk@iht.nsatus

Received 7 November 2016; Accepted 7 November 2016; Published 23 March 2017

Copyright © 2017 Sutasn Thipprakmas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

This article has no abstract.