Advances in Materials Science and Engineering

Modern Engineered Materials and Technologies for Metal Forming Applications


Publishing date
18 Nov 2016
Status
Published
Submission deadline
01 Jul 2016

1King Mongkut’s University of Technology, Thonburi, Thailand

2Gyeongsang National University, Jinju, Republic of Korea

3Luleå University of Technology, Luleå, Sweden


Modern Engineered Materials and Technologies for Metal Forming Applications

Description

There is a growing industrial use of advanced materials. This has pushed a corresponding development of advanced technologies for metal forming. It is important to understand the interaction between materials of workpiece and the tool as well as the effect of coatings, lubricants, process parameters, and so forth when improving efficiency of process, product quality, and tool life.

This special issue will compile papers summarizing the state of the art concerning the above-mentioned knowledge. The profound insights into this knowledge are extremely important for providing valuable information and will also provide directions for future research.

We encourage and invite researchers in industry and academia to contribute original research articles as well as reviews within the scope of this issue.

Potential topics include, but are not limited to:

  • High-performance steels related to the metal forming applications
  • Lightweight metal alloys related to the metal forming applications
  • Coated blank materials
  • Tailored blank materials
  • Advanced tool steels
  • Coating for tool steels
  • Advanced forming of metal matrix composites (MMCs)
  • Development of tool and processes
  • Lubricants for forming
  • Various advanced forming technologies (roll forming, warm and hot forming, electromagnetic forming, etc.)
  • Modeling of materials and forming
  • Experiments for model calibration and validation

Articles

  • Special Issue
  • - Volume 2017
  • - Article ID 3196509
  • - Editorial

Modern Engineered Materials and Technologies for Metal Forming Applications

Sutasn Thipprakmas | Man S. Joun | Lars-Erik Lindgren
  • Special Issue
  • - Volume 2017
  • - Article ID 7059389
  • - Research Article

Numerical and Experimental Research on Cold Compression Deformation Method for Reducing Quenching Residual Stress of 7A85 Aluminum Alloy Thick Block Forging

Cui Jin-dong | Yi You-ping | Luo Guo-yun
  • Special Issue
  • - Volume 2016
  • - Article ID 5607386
  • - Research Article

Development of a Master Sintering Curve for Al-Mg Alloy

Yong-Shin Lee | Sang-Jun Lee | ... | Duck Jae Yoon
  • Special Issue
  • - Volume 2016
  • - Article ID 6597317
  • - Research Article

Investigation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts

Olena V. Berezshnaya | Eduard P. Gribkov | Valeriy D. Kuznetsov
  • Special Issue
  • - Volume 2016
  • - Article ID 4152963
  • - Review Article

Inverse Strategies for Identifying the Parameters of Constitutive Laws of Metal Sheets

P. A. Prates | A. F. G. Pereira | ... | J. V. Fernandes
  • Special Issue
  • - Volume 2016
  • - Article ID 3803472
  • - Research Article

Modeling of Flow Stress of 2026 Al Alloy under Hot Compression

Zheng-bing Xiao | Yuan-chun Huang | Yu Liu
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.300
Journal Citation Indicator0.240
Impact Factor1.726
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.