Influence of Initial Contact Geometry on Mechanical Properties in Friction Welding of Dissimilar Materials Aluminum 6351 T6 and SAE 1020 Steel

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Welding time</td><td class="align_center">4 s, 7 s, and 10 s</td></tr><tr><td class="align_left">Welding pressure</td><td class="align_center">21.63 MPa; 43.33 MPa; 64.90 MPa</td></tr><tr><td class="align_left">Forging pressure</td><td class="align_center">The same of welding pressure</td></tr><tr><td class="align_left">Temperature</td><td class="align_center">Room temperature (without preheating)</td></tr><tr><td class="align_left">Rotation</td><td class="align_center">1750 RPM (fixed)</td></tr><tr><td class="align_left">Forging time</td><td class="align_center">6 s (fixed)</td></tr><tr><td class="align_left">Diameter</td><td class="align_center">3/8″ = 9.53 mm (fixed)</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Advances in Materials Science and Engineering

tab3

Table 3

Table 3: Influence of Initial Contact Geometry on Mechanical Properties in Friction Welding of Dissimilar Materials Aluminum 6351 T6 and SAE 1020 Steel 

Table 3 | Influence of Initial Contact Geometry on Mechanical Properties in Friction Welding of Dissimilar Materials Aluminum 6351 T6 and SAE 1020 Steel 