Advances in Materials Science and Engineering

Table of Contents: 2019

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 1690378
  • - Research Article

Poole–Frenkel Emission Saturation and Its Effects on Time-to-Failure in Ta-Ta2O5-MnO2 Capacitors

Q. F. Pan | Q. Liu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 8974625
  • - Research Article

The Mechanical Properties of Recycled Coarse Aggregate Concrete with Lithium Slag

Yongjun Qin | Jiejing Chen | ... | Yabin Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2019
  • - Article ID 7089718
  • - Editorial

Advances in Modelling of Heat and Mass Transfer in Porous Materials

Giorgio Pia | Jianchao Cai | ... | Shimin Liu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 2184094
  • - Research Article

Effects of Continuous Laydown and Compaction on Interlayer Shear Bonding of Asphalt Layers

Haitao Zhang | Mingyang Gong | ... | Quansheng Sun
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 2915684
  • - Research Article

Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures

Meimei Song | Ke Wu | Yihua Dou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 8736103
  • - Research Article

Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

Shengrong Xie | Xiaoyu Wu | ... | Yuxin Ren
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 4530954
  • - Research Article

Deformation Caused by Dynamic Load and Support Requirements in a Deep Gob-Side Entry Rock Mass

Yandong Zhang | Yongjie Yang | Changhua Zhuge
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2019
  • - Article ID 6926413
  • - Research Article

Analysis of Strength Factors of Steel Cord Conveyor Belt Splices Based on the FEM

Xianguo Li | Xinyu Long | ... | Changyun Miao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 2783784
  • - Research Article

Force and Deformation Characteristics during the Reconstruction and Expansion of Shallow Single-Tube Tunnels into Large-Span Multiarch Tunnels

Yanling Jia | Yongxu Xia | ... | Shaowen Zhou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 4537283
  • - Research Article

Chloride Penetration in Coastal Concrete Structures: Field Investigation and Model Development

Weidong Zhuo | Quanzhe Yan | ... | Fuqiang He
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 6509608
  • - Research Article

Experimental Study on Manufactured Sand-Soil Bearing Capacity W-T-BC Model Based on Mechanical Response of Rotary Penetration

Xiangfeng Lv | Shuo Zhang | Hongyuan Zhou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 5693654
  • - Research Article

Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding

Jianfeng Yang | Li Li | Haojie Lian
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 3027303
  • - Review Article

The Application of Hyaluronic Acid-Based Hydrogels in Bone and Cartilage Tissue Engineering

Hongru Li | Zhiping Qi | ... | Su Pan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2019
  • - Article ID 8571297
  • - Research Article

Influence of Existing Defects on Mechanical Properties of NC Lining

Sen Zhang | Zhihua Ren | ... | Zhixin Yan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2019
  • - Article ID 1820671
  • - Research Article

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Qingshan Yang | Jiahong Dai | ... | Fusheng Pan
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.