Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr class="thead"><td class="align_left">Material density (mg/mm<sup>3</sup>)</td><td class="align_center">Elastic modulus (GPa)</td><td class="align_center">Poisson’s ratio</td><td class="align_center"><i>K</i> value</td><td class="align_center"><i>N</i> value</td></tr><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr><td class="align_left">2.64</td><td class="align_center">68.2</td><td class="align_center">0.33</td><td class="align_center">525.4</td><td class="align_center">0.1956</td></tr><tr class="table-tr"><td colspan="5"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Material performance parameters.</div>

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs 