Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs

<table class="table-group" id="tab7"><tr><td><table class="table"><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr class="thead"><td class="align_left">Rib height (mm)</td><td class="align_center">Outer diameter (mm)</td><td class="align_center">Inside diameter (mm)</td><td class="align_center">Width of middle latitudinal ribs (mm)</td><td class="align_center">Width of end latitudinal ribs (mm)</td><td class="align_center">Numbers of longitudinal ribs</td><td class="align_center">Width of longitudinal ribs (mm)</td><td class="align_center">Gap between two latitudinal ribs (mm)</td></tr><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr><td class="align_left">2.5</td><td class="align_center">405</td><td class="align_center">395</td><td class="align_center">30</td><td class="align_center">50</td><td class="align_center">10</td><td class="align_center">6</td><td class="align_center">144</td></tr><tr class="table-tr"><td colspan="8"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Parameters of the sample with 2.5 mm height ribs.</div>

Advances in Materials Science and Engineering

tab7

Table 7

Table 7: Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs 