Research Article
Thermomechanical Optimization and Comparison of a Low Thermal Inertia Mold with Rectangular Heating Channels and a Conventional Mold
Table 6
Optimal design parameters.
| | | Parameters | Water | Oil |
| | Reference circular | A | 8 mm | | B | 16 mm | | C | 16 mm |
| | Circular optimized | A | 9 mm | 15 mm | | B | 2 mm | 2 mm | | C | 17 mm | 5 mm |
| | Rectangular optimized | D | 2.5 mm | 5 mm | | E | 18 mm | 35 mm | | F | 2 mm | 4.5 mm | | G | 5 mm | 5 mm |
|
|
