Hydrogen Effect on Cumulation of Failure, Mechanical Properties, and Fracture Toughness of Ni-Cr Alloys

<div>Dependences of fracture toughness <i>K</i><sub>c</sub> at hydrogen pressure of 30 MPa of specimens of 10 (7), 20 (5, 8) and 25 (6) mm thickness on the hydrogen content <i>C</i><sub>H</sub> at a strain rate of 0.1 mm/min. The numbers near curves correspond to ordinal numbers in Table <a href="../tab2/">2</a>.</div>

Advances in Materials Science and Engineering

fig4

Figure 4

Figure 4: Hydrogen Effect on Cumulation of Failure, Mechanical Properties, and Fracture Toughness of Ni-Cr Alloys 