Research Article
Study on Simulation of Stamping Process and Optimization of Process Parameters of Fender
Table 10
Rate of metal change at each point.
| Test point | Rate of metal change (%) |
| 1 | −18.580 | 2 | −24.765 | 3 | −21.874 | 4 | −21.935 | 5 | −5.580 | 6 | −19.979 | 7 | −21.308 | 8 | −21.874 | 9 | −7.034 | 10 | −5.650 | 11 | −4.650 | 12 | −23.559 | 13 | −23.651 | 14 | −23.168 | 15 | −22.365 | 16 | −21.650 |
|
|