Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study

<div>Schematic illustration of tunnel boring machine cutterhead (a), position of buttons and inserts in the drag bit (b) (TBM diameter is 3000 mm and drag bit dimension is 195 × 115 × 90 mm).</div>

Advances in Materials Science and Engineering

fig4

Figure 4

Figure 4: Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 

Figure 4 | Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 