Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study

<div>Tunnel boring machine insert produced by conventional powder metallurgy method (a), 3D printed structure for HIP (b), 3D printed structure ready for filling and following consolidation by SPS (c) (length, width and height of sample is 36 × 16 × 30 mm).</div>

Advances in Materials Science and Engineering

fig5

Figure 5

Figure 5: Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 

Figure 5 | Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 