Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study

<div>Digital photos of manufactured Ti6Al4V lattice (a) and heated and nitrided Ti6Al4V lattices at 750°C (b), 900°C (c), and 1050°C (d). Volume fraction and unit cell size are 6% and 2 mm, respectively (diameter of lattice structures is 20 mm, and length is 15 mm).</div>

Advances in Materials Science and Engineering

fig7

Figure 7

Figure 7: Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 

Figure 7 | Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 