Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study

<div>Digital optical photos of heated and nitrided Ti6Al4V lattices at 900°C with volume fraction and unit cell size of 26% and 0.75 mm (a); 16% and 1.00 mm (b); and 6% and 2.00 mm (c), respectively (diameter of lattice structures is 20 mm, and length is 15 mm).</div>

Advances in Materials Science and Engineering

fig9

Figure 9

Figure 9: Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 

Figure 9 | Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study 