Research Article
Evaluation of the Mechanical Properties of Porous Thermoplastic Polyurethane Obtained by 3D Printing for Protective Gear
Table 1
Detailed conditions of 3D printing.
| Fill pattern | Number of layers | Overlap with outer wall (%) | Height of layer (mm) | 10% (14x) | 50% (24x) | 100% (24x) | 5T | 10T | Top (ea) | Bottom (ea) |
| | | | 25 | 50 | 6 | 3 | 15 | 0.2 |
|
|