Research Article
Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method
Table 1
Custom 450 chemical composition and various mechanical properties [
34].
| Property | Unit | Custom 450 |
| Chemical composition | % | C < 0.05, 14–16 Cr, 1.25–1.75 Cu, 75 Fe, Mn < 1, 0.5–1 Mo, 5–7 Ni | Density (20°C) | g/cm3 | 7.75 | Hardness | Brinell | 278 | Yield stress | MPa | 814 | Tensile stress | MPa | 979 | Elasticity modulus | GPa | 200 | Poisson’s ratio | | 0.29 | Thermal conductivity | W/m-K | 15 |
|
|