Research Article
Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method
Table 10
Comparison between confirmatory test results and calculated values for wear.
| Material | Confirmatory test results | Calculated values | Differences | Wearmes (N) | S/N (ηmes, dB) | Wearcalc (N) | S/N (ηcalc, dB) | Wearmes−wearcalc | ηmes−ηcalc |
| Custom 450 | 0.053 | 25.5145 | 0.056 | 25.0340 | −0.003 | 0.4805 |
|
|