Research Article
Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method
Table 3
Control factors and their levels.
| Control factors | Unit | Code | Levels | 1 | 2 | 3 | 4 |
| Cutting tool (Ct) | ā | A | T1 | T2 | T3 | T4 | Cutting speed (Vc) | m/min | B | 40 | 80 | 120 | 160 | Feed rate (f) | mm/rev | C | 0.05 | 0.10 | 0.15 | 0.20 |
|
|