Research Article
Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method
Table 8
Response table of S/N ratios for tool wear.
| Control factors | S/N ratios (dB) | Max-min | Order of significance | Level 1 | Level 2 | Level 3 | Level 4 |
| Ct | 23.68 | 23.24 | 23.26 | 23.16 | 0.52 | 3 | Vc (m/min) | 24.15 | 24.09 | 23.20 | 21.91 | 2.24 | 1 | f (mm/rev) | 23.87 | 23.23 | 23.23 | 23.01 | 0.87 | 2 |
|
|