Microstructural Characterization and Mechanical Properties of Ti-6Al-4V Alloy Subjected to Dynamic Plastic Deformation Achieved by Multipass Hammer Forging with Different Forging Temperatures

<div>Typical metallographic images of samples prepared at different forging temperatures: (a) 925°C; (b) 950°C; (c) 975°C; (d) 1000°C; (e) 1025°C.</div>

Advances in Materials Science and Engineering

fig5

Figure 5

Figure 5: Microstructural Characterization and Mechanical Properties of Ti-6Al-4V Alloy Subjected to Dynamic Plastic Deformation Achieved by Multipass Hammer Forging with Different Forging Temperatures 

Figure 5 | Microstructural Characterization and Mechanical Properties of Ti-6Al-4V Alloy Subjected to Dynamic Plastic Deformation Achieved by Multipass Hammer Forging with Different Forging Temperatures 