Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12

<div>Effect of laser power on surface topography of SLS parts: (a) LP = 4.5 watt; (b) LP = 6.0 watt; (c) LP = 7.0 watt; (d) LP = 8.0 watt.</div>

Advances in Materials Science and Engineering

fig11

Figure 11

Figure 11: Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 

Figure 11 | Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 