Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12

<div>Schematics of the end-of-vector (EOV) effect in the SLS process.</div>

Advances in Materials Science and Engineering

fig8

Figure 8

Figure 8: Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 

Figure 8 | Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12 