Research Article
Effects of Fabrication Parameters on the Properties of Parts Manufactured with Selective Laser Sintering: Application on Cement-Filled PA12
Table 4
Number and distribution of test specimens.
| | Tensile test | Flexural test | Compressive test |
| Laser power | 3LPs (6, 7, and 8 watt) | Orientations | 3 orientations (T1, T2, and T3) | 3 orientations (F1, F2, and F3) | 2 orientations (C1 and C3) | Samples | 5 specimens along each orientation | Total | 3 × 3 × 5 = 45 test specimens | 3 × 3 × 5 = 45 test specimens | 3 × 2 × 5 = 30 test specimens |
|
|