Research Article
Influence of Existing Defects on Mechanical Properties of NC Lining
Table 3
Fitting parameters of bearing capacity loss rate of lining under combined defects.
| Defective part | Load direction | | | | c | | | |
| Crown | Oblique 45° | 0.1831 | 0.1509 | 5.0950 | 0.0094 | 3.4242 | 0.0577 | 0.986 | Horizontal | 0.4054 | 0.1741 | 6.6478 | 0.0191 | 1.1493 | 0.0895 | 0.985 |
| Spandrel | Vertical | 1.6485 | 0.1339 | 4.7304 | 0.1369 | 0.3973 | 0.0490 | 0.985 | Horizontal | 0.5973 | 0.1406 | 4.7159 | 0.0426 | 0.8021 | 0.0801 | 0.974 |
|
|