Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber

<div class="floats-full-page floats-full-page-other"><h2>Table 3</h2><div class="floats-full-page-caption"><div>Physical properties of polypropylene fibers.</div></div><div class="floats-full-page-content"><table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr /></td></tr><tr class="thead"><td class="align_left">Parameter</td><td class="align_center">Value</td></tr><tr><td class="thead-hr" colspan="2"><hr /></td></tr><tr><td class="align_left">Fiber type</td><td class="align_center">Single fiber</td></tr><tr><td class="align_left">Density (g·cm<sup>−3</sup>)</td><td class="align_center">0.91</td></tr><tr><td class="align_left">Length (mm)</td><td class="align_center">12.00</td></tr><tr><td class="align_left">Diameter (<i>μ</i>m)</td><td class="align_center">48.00</td></tr><tr><td class="align_left">Elongation at break (%)</td><td class="align_center">15.00</td></tr><tr><td class="align_left">Modulus of elasticity (GPa)</td><td class="align_center">4.80</td></tr><tr><td class="align_left">Breaking tensile strength (MPa)</td><td class="align_center">486.00</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr" /></td></tr></table></td></tr></table></div></div>

Table 3 | Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber

title

Table 3: Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber

description

Table 3

About this journal

<p><em>Advances in Materials Science and Engineering </em>publishes research in all areas of materials science and engineering, including the synthesis and properties of materials, and their applications in engineering applications.</p>


Journal profile

Meet the editorial board

<p>Chief Editor, Amit Bandyopadhyay, is based at Washington State University and is interested in &nbsp;the fields of additive manufacturing or 3D printing of advanced materials. His current research is focused on metal additive manufacturing, biomedical devices and multi‑materials structures.</p>


Editor spotlight

Submit to Special Issue

We currently have a number of Special Issues open for submission. Special Issues highlight emerging areas of research within a field, or provide a venue for a deeper investigation into an existing research area.