In the article titled “High- and Low-Temperature Properties and Thermal Stability of Silica Fume/SBS Composite-Modified Asphalt Mortar” [1], there were errors in Section 3.1 titled “Cone Penetration” and in Section 3.4 titled “BBR” that should be corrected as follows: (1) In Section 3.1, the horizontal ordinate of Figures 3 and 4 “Cone penetration (0.1 mm)” should be corrected to “Cone penetration (mm).” The correct figures are as follows. (2) In Section 3.4, the data of silica fume/SBS composite modified asphalt mortar in Figures 10 and 11 was mixed up with diatomite/SBS composite modified asphalt mortar. The correct figures are as follows.
Corrigendum | Open Access
Corrigendum to “High- and Low-Temperature Properties and Thermal Stability of Silica Fume/SBS Composite-Modified Asphalt Mortar”
Received22 Jul 2019
Accepted06 Sept 2019
Published24 Sept 2019
References
K. Cao, W. Xu, D. Chen, and H. Feng, “High- and low-temperature properties and thermal stability of silica fume/SBS composite-modified asphalt mortar,” Advances in Materials Science and Engineering, vol. 2018, Article ID 1317436, 8 pages, 2018.
View at: Publisher Site | Google Scholar
Copyright
Copyright © 2019 Cao Kai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.