Research Article
Influence of Different Textures on Machining Performance of a Milling Tool
Table 1
Parameters of the experiment system.
| Parameters of the laser system | Parameters of the milling test | Parameter | Value | Parameters | Value |
| Power | 12 W | Spindle speed (r/min) | 3000 | Spot diameter | 50 μm | Feed speed νf (mm/min) | 200 | Frequency | 60 kHz | Milling depth ap (mm) | 2 | Processing times | 20 | Milling width ae (mm) | 8 | Repeat accuracy | ±0.003 mm | Cooling method | Dry |
|
|