Advances in Materials Science and Engineering

Table of Contents: 2020

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 8589126
  • - Corrigendum

Corrigendum to “Experimental Study on the Effects of Initial Shear Stress and Vibration Frequency on Dynamic Strength of Saturated Sands”

Jian Zhang | Jiuting Cao | Sijie Huang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 4545063
  • - Research Article

Studying the Properties of SBS/Rice Husk Ash-Modified Asphalt Binder and Mixture

Zhen Lu | Aimin Sha | ... | Junfeng Gao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 3765791
  • - Review Article

Processing Methods and Mechanical Properties of Aluminium Matrix Composites

Gebre Fenta Aynalem
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 3248294
  • - Research Article

Change in the Mechanic Properties and Electrical Resistivity of High Water Backfill Material under Electrochemical Treatment

Dongdong Chen | Yaohui Sun | ... | Pengyu Qi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 3569125
  • - Research Article

Study on the Preparation of Biohydrocarbon Fuel by Catalytic Hydrogenation of Swida wilsoniana Pyrolysis Products

Aihua Zhang | Juan Tang | ... | Zhihong Xiao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 5035763
  • - Research Article

Mechanical Performance of Concrete Made with Recycled Aggregates from Concrete Pavements

Yancong Zhang | Lingling Gao | Wei Bian
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 4698603
  • - Research Article

Influence of Plantain Pseudostem Fibres and Lime on the Properties of Cement Mortar

Humphrey Danso
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 3196345
  • - Research Article

Prediction of Adhesively Bonded Polyurethane-to-Steel Double Butt Joint Failure Using Uncertainty Analysis

Xiaofu Li | Chuanpeng Ji | ... | Shulin Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 9682740
  • - Research Article

Prediction of Later-Age Concrete Compressive Strength Using Feedforward Neural Network

Thuy-Anh Nguyen | Hai-Bang Ly | ... | Van Quan Tran
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 4718960
  • - Research Article

Experimental and Numerical Study on the Influence of Corrosion Rate and Shear Span Ratio on Reinforced Concrete Beam

Xiao Guo | Hongwei Wang | ... | Dan Yu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 9283949
  • - Research Article

An Efficient Damage Identification Method for Simply Supported Beams Based on Strain Energy Information Entropy

Chang-Sheng Xiang | Ling-Yun Li | ... | Cong Dang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 8726407
  • - Research Article

Effects of Simulation-Guided Microwave Presintering Process on the Preparation and Final Properties of Pure Ceramic Rings: Lower Sintering Temperature and Higher Mechanical Properties

Xiao Lu | Tong-Tong Zhou | ... | Yun-Ze Long
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 2417496
  • - Research Article

Mechanical Performance and Durability Evaluation of Sandstone Concrete

Fayong Yang | Haibin Li | ... | Wenbo Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2020
  • - Article ID 9579853
  • - Research Article

Direction of Groove Detection for Wear Image of Four-Ball Friction Test Based on Gray Difference of Inclination Angle

Mei Xiao | Ying Zhang | ... | Lei Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2020
  • - Article ID 4546731
  • - Research Article

Study on Void Structure Reconstruction of Asphalt Mixture by X-Ray Computed Tomography and Otsu’s Method

Jiantong Zhang | Jun Yang | ... | Rui Yang
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.