Research Article
Prediction of Tool Lifetime and Surface Roughness for Nickel-Based Waspaloy
Table 6
Fitting curve formula of each set of cutting parameter on the cutting time.
| Cutting parameters | Curve formula |
| V = 40 m/min, fz = 0.3 mm/tooth, and ap = 0.3 mm | | V = 37.5 m/min, fz = 0.35 mm/tooth, and ap = 0.25 mm | | V = 35 m/min, fz = 0.4 mm/tooth, and ap = 0.2 mm | |
|
|