Thermomechanical Analysis of the Effects of Water Distribution on Cracks during Vertical Continuous Casting under Soft Reduction Conditions

<div>Comparison of the first principal stress at 4 mm below the wide surface under different water distribution schemes. (a) Outlet of zone 2. (b) Outlet of zone 3.</div>

Advances in Materials Science and Engineering

fig15

Figure 15

Figure 15: Thermomechanical Analysis of the Effects of Water Distribution on Cracks during Vertical Continuous Casting under Soft Reduction Conditions 

Figure 15 | Thermomechanical Analysis of the Effects of Water Distribution on Cracks during Vertical Continuous Casting under Soft Reduction Conditions 