Research Article
Thermomechanical Analysis of the Effects of Water Distribution on Cracks during Vertical Continuous Casting under Soft Reduction Conditions
Table 1
The reduction amount of different idle rollers in the reduction zone.
| Idle roller number | Roll diameter (mm) | Distance from meniscus (m) | Reduction amount (mm) |
| 1 | 250 | 6.16 | 0.38 | 2 | 250 | 6.46 | 1.68 | 3 | 250 | 6.78 | 2.68 | 4 | 250 | 7.08 | 3.68 | 5 | 250 | 7.38 | 4.68 | 6 | 250 | 7.68 | 5.40 | 7 | 250 | 7.98 | 6.15 | 8 | 250 | 8.28 | 7.33 | 9 | 250 | 8.58 | 7.95 | 10 | 250 | 8.88 | 8.60 | 11 | 300 | 9.22 | 10.00 |
|
|