Research Article
Calculation and Estimation of Surface Roughness and Energy Consumption in Milling of 6061 Alloy
Table 1
Taguchi L16 experimental design.
| Parameters | Levels | Level 1 | Level 2 | Level 3 | Level 4 |
| Cutting speed V (m/min) | 60 | 120 | 180 | 240 | Feed rate F (mm/rev) | 0.1 | 0.15 | 0.2 | 0.25 | Depth of cut DOC (mm) | 0.5 | 1 | 1.5 | 2 | Cooling methods Cm | 1 (yes) | 2 (no) | ā | ā | Wet | Dry |
|
|