| Feature ID | Feature name | Feature volume | Machine operation | Cutting tool | Machine tool | Work piece material | Brinell hardness | Cutting tool material | Machine parameter | Feature location | Setups |
| 7 | Slot blind round corner | 15709 | Slot milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 1, 0), location ZX_FRONT; TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 9 | Slot blind round corner | 15709 | Slot milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, −1, 0), location ZX_BACK; TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 8 | Pocket blind round corner | 11946 | Pocket milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 3 | STEP blind round corner | 7486 | Shoulder milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (1, 0, 0), location YZ_LEFT; TAD (0, 1, 0), location ZX_FRONT; TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 4 | STEP blind round corner | 7486 | Shoulder milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (−1, 0, 0), location YZ_RIGHT; TAD (0, 1, 0), location ZX_FRONT TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 5 | STEP blind round corner | 7486 | Shoulder milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (−1, 0, 0), location YZ_RIGHT; TAD (0, −1, 0), location ZX_BACK; TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 6 | STEP blind round corner | 7486 | Shoulder milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (1, 0, 0), location YZ_LEFT; TAD (0, −1, 0), location ZX_BACK; TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 13 | Slot through | 6600 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 14 | Slot through | 6600 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 0, −1), location XY_TOP | 1 (XY_TOP) | 23 | Hole blind | 1177.5 | Drilling | Twist drill | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, −1, 0), location ZX_BACK | 2 (ZX_BACK) | 24 | Hole blind | 1177.5 | Drilling | Twist drill | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, −1, 0), location ZX_BACK | 2 (ZX_BACK) | 25 | Hole blind | 1177.5 | Drilling | Twist drill | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 1, 0), location ZX_FRONT | 3 (ZX_FRONT) | 26 | Hole blind | 1177.5 | Drilling | Twist drill | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 1, 0), location ZX_FRONT | 3 (ZX_FRONT) | 2 | Slot through | 36000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (−1, 0, 0), location YZ_RIGHT | 4 (YZ_RIGHT) | 15 | Slot through | 2000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (−1, 0, 0), location YZ_RIGHT | 4 (YZ_RIGHT) | 16 | Slot through | 2000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (−1, 0, 0), location YZ_RIGHT | 4 (YZ_RIGHT) | 1 | Slot through | 36000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (1, 0, 0), location YZ_LEFT | 5 (YZ_LEFT) | 17 | Slot through | 2000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (1, 0, 0), location YZ_LEFT | 5 (YZ_LEFT) | 18 | Slot through | 2000 | Slot milling | End mill cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (1, 0, 0), location YZ_LEFT | 5 (YZ_LEFT) | 12 | Pocket blind round corner | 11946 | Pocket milling | Corner rounding milling cutter | Milling machine | Low-carbon steel | 150–200 | HSS | 21–30 (m/min), 0.3 (mm/rev) | TAD (0, 0, 1), location XY_BOTTOM | 6 (XY_BOTTOM) |
|
|