Multiobjective Optimization of Milling Parameters for Ultrahigh-Strength Steel AF1410 Based on the NSGA-II Method

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Tensile strength (MPa)</td><td class="align_center">Yield strength (MPa)</td><td class="align_center">Elongation rate (%)</td><td class="align_center">Surface shrinkage (%)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">1620</td><td class="align_center">1480</td><td class="align_center">12</td><td class="align_center">60</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Mechanical properties of AF1410 steel.</div>

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Multiobjective Optimization of Milling Parameters for Ultrahigh-Strength Steel AF1410 Based on the NSGA-II Method 