Advances in Materials Science and Engineering

Recent Advances in the Manufacturing of Polymeric Composites


Publishing date
01 May 2022
Status
Closed
Submission deadline
24 Dec 2021

Lead Editor

1Shanghai Jiao Tong University, Shanghai, China

2University of Aveiro, Aveiro, Portugal

3Arts et Métiers ParisTech, Châlons-en-Champagne, France

This issue is now closed for submissions.
More articles will be published in the near future.

Recent Advances in the Manufacturing of Polymeric Composites

This issue is now closed for submissions.
More articles will be published in the near future.

Description

Polymeric composites are an important category of advanced composite materials being widely utilized in a broad spectrum of industries. This can be evidenced by their critical impacts on material distribution in the modern industrial fields. This type of material shows superior mechanical/physical properties and excellent structural functionalities.

Despite their widespread industrial applications, the manufacturing of polymeric composites is of critical importance as the processing must obtain precise dimensions and superior properties as well as high quality. The manufacture of polymeric composites involves issues such as the design of the processing operations, the optimization of the machining parameters, the minimization of the manufacturing damage, the quantification of accuracy and quality, the monitoring of manufacturing outputs, as well as the control of tool wear and failure.

This Special Issue aims to provide a platform for discussing the recent research challenges and achievements in the manufacturing of polymeric composites, including both experimental and numerical investigations. Its significance lies in reporting the newest studies in various fabrication and manufacturing processes for polymeric composites covering various processing methods, including but not limited to nano/micro-manufacturing, conventional machining, additive manufacturing, and non-conventional manufacturing. Original research and review articles are welcome.

Potential topics include but are not limited to the following:

  • Out-of-autoclave, automated tape placement, and automated fiber placement for polymeric composites
  • Chip removal mechanisms of polymeric composites
  • Machinability characterization and evaluation of polymeric composites
  • Nano/micro-manufacturing of polymeric composites
  • Conventional/non-conventional machining of polymeric composites
  • Additive manufacturing of discontinuous and continuous polymeric composites
  • Experimental and numerical studies of manufacturing polymeric composites
  • Monitoring and prediction of manufacturing processes for polymeric composites
  • Damage detection, evaluation, and suppression of polymeric composites
  • Surface quality and dimensional accuracy of polymeric composites

Articles

  • Special Issue
  • - Volume 2021
  • - Article ID 4222344
  • - Research Article

Investigation of Drilling Process Parameters of Palmyra Based Composite

A. Mohan Kumar | R. Rajasekar | ... | M. Muhibbullah
  • Special Issue
  • - Volume 2021
  • - Article ID 6329400
  • - Research Article

Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass

K. B. Prakash | Yahya Ali Fageehi | ... | S Rajkumar
  • Special Issue
  • - Volume 2021
  • - Article ID 8665674
  • - Research Article

Finite Element Analysis of Temperature Distribution and Stress Behavior of Squeeze Pressure Composites

P. Gurusamy | T. Sathish | ... | S. Prasath
  • Special Issue
  • - Volume 2021
  • - Article ID 9444577
  • - Research Article

Novel Lanthanum Doped Magnetic Teff Straw Biochar Nanocomposite and Optimization Its Efficacy of Defluoridation of Groundwater Using RSM: A Case Study of Hawassa City, Ethiopia

Temesgen Abeto Amibo | Surafel Mustafa Beyan | Tsegaye Markos Damite
  • Special Issue
  • - Volume 2021
  • - Article ID 1041944
  • - Research Article

Interface Bonding Properties between Nonwater Reaction Polyurethane Polymer Materials and Concrete

Xijun Zhang | Chaojie Wang | ... | Mingsheng Shi
  • Special Issue
  • - Volume 2021
  • - Article ID 2491489
  • - Research Article

Investigation of Dynamic, Mechanical, and Thermal Properties of Calotropis procera Particle-Reinforced PLA Biocomposites

K. Yoganandam | Vigneshwaran Shanmugam | ... | Murugesan Bharani
Advances in Materials Science and Engineering
 Journal metrics
See full report
Acceptance rate43%
Submission to final decision59 days
Acceptance to publication20 days
CiteScore2.800
Journal Citation Indicator0.270
Impact Factor2.098
 Submit

Article of the Year Award: Outstanding research contributions of 2021, as selected by our Chief Editors. Read the winning articles.