logo

Advances in Polymer Technology

Advances in Polymer Technology / Table of Contents

Table of Contents

Table of Contents

  • Advances in Polymer Technology -
  • Special Issue
  • Volume 2020
  • - Article ID 8475497
  • - Research Article

Preparation and Characterization of Hydrophilic Wetting-Modified Polyamide Fibers

Liang Li | Shuping Liu | ... | Zedong Hu
  • Advances in Polymer Technology -
  • Special Issue
  • Volume 2020
  • - Article ID 4097520
  • - Research Article

Polyethylene and Polyvinyl Chloride-Blended Polystyrene Nanofibrous Sorbents and Their Application in the Removal of Various Oil Spills

Mohamed. A. Alnaqbi | Afra G. Al Blooshi | Yaser E. Greish
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 8946591
  • - Research Article

Tensile Behavior of Acrylonitrile Butadiene Styrene at Different Temperatures

Jiquan Li | Yadong Jia | ... | Shaofei Jiang
  • Advances in Polymer Technology -
  • Special Issue
  • Volume 2020
  • - Article ID 4504062
  • - Research Article

Facile Method for Obtaining Gold-Coated Polyester Surfaces with Antimicrobial Properties

M. Drobota | M. Butnaru | ... | M. Aflori
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 1308081
  • - Research Article

Tea Polysaccharide (TPS) Reduces Astrocytes Apoptosis Induced by Oxygen-Glucose Deprivation/Reoxygenation by Regulating the miR-375/SRXN1 Axis

Ying Jiang | Hongmei Sun | ... | Jun Yan
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 7310657
  • - Research Article

Polymethacrylate Sphere-Based Assay for Ultrasensitive miRNA Detection

Samira Hosseini | Patricia Vázquez-Villegas | ... | Sergio O. Martínez-Chapa
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 7023616
  • - Review Article

Intelligent Injection Molding on Sensing, Optimization, and Control

Peng Zhao | Jianfeng Zhang | ... | Lih-Sheng Turng
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 5818606
  • - Research Article

FEM of Gas-Assisted Injection Molding Based on 3D Model

Xinchao Wang | Tie Geng | ... | Lih-Sheng Turng
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 6861216
  • - Research Article

Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process

Tangqing Kuang | Qiang Feng | ... | Hesheng Liu
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 7358930
  • - Research Article

Elasticity Solutions for Sandwich Arches considering Permeation Effect of Adhesive

Ruili Huo | Yichen Liu | ... | Ding Zhou
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 6575326
  • - Research Article

Ensemble Just-In-Time Learning-Based Soft Sensor for Mooney Viscosity Prediction in an Industrial Rubber Mixing Process

Huaiping Jin | Jiangang Li | ... | Lixian Shi
  • Advances in Polymer Technology -
  • Special Issue
  • Volume 2020
  • - Article ID 7124394
  • - Review Article

Can Superabsorbent Polymers Improve Plants Production in Arid Regions?

Mohsen Jahan | Mehdi Nassiri Mahallati
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 7654249
  • - Research Article

Optimization of Injection-Molding Process Parameters for Weight Control: Converting Optimization Problem to Classification Problem

Peng Zhao | Zhengyang Dong | ... | Jianzhong Fu
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 3161068
  • - Research Article

Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding

Feng Liu | Taidong Li | ... | Shaofei Jiang
  • Advances in Polymer Technology -
  • Special Issue
  • - Volume 2020
  • - Article ID 7580460
  • - Research Article

Numerical Simulation and Experimental Study on Flow of Polymer Aqueous Solution in Porous Jet Nozzle

Minghui Wei | Chenghuai Wu | Yanxi Zhou
Advances in Polymer Technology
Publishing Collaboration
More info
Wiley Hindawi logo
Journal metrics
See full report
Acceptance rate20%
Submission to final decision124 days
Acceptance to publication23 days
CiteScore4.800
Journal Citation Indicator0.400
Impact Factor3.1
See full report
APC$2060
Submit Evaluate your manuscript with the free Manuscript Language Checker
Author guidelines Editorial board Databases and indexing

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.