Polymeric materials were evaluated with regard to their spinnability and respective fibre diameters. A modified single fibre spinning device was firstly used to derive a novel generalised model, utilising process parameters (die diameter, throughput, and stretching relevant take-up pressures) and material properties (zero shear viscosity) to predict the diameter of polymeric fibres on the basis of four different polymers. Further evaluation of the resulting power law dependence was conducted on filaments produced via conventional melt spinning and meltblown processes. Fibres produced on the pilot machines showed close agreement with the model equation with only the need to adjust an easily calculable device dependent factor. The outcome of the presented work is a user-friendly model of high practical relevance, which can be used to predict the diameter of amorphous and semicrystalline polymeric fibres, independent of material and machine used with sufficient accuracy for fast estimations.

Alexander M. Bier

Michael Redel

Dirk W. Schubert

Model to Predict Polymer Fibre Diameter during Melt Spinning

In this study, both polyvinyl chloride (PVC) and polyacrylonitrile (PAN) were dissolved in dimethyl formaldehyde (DMF) with 8 wt. % concentrations at 25 : 75, 50 : 50, and 75 : 25 of PVC: PAN blending. For the investigation of the homogeneity and compatibility of mixture polymer solutions, it is examined by rheological properties such as viscosity, shear stress, shear rate, and calculation of the flow behavior index, while the investigation of the stability and high density of nanofibers without beads used field-emission scanning electron microscopy (FE-SEM), Fourier transform near-infrared spectroscopy (FT-NIR), X-ray diffraction (XRD), and differential scanning calorimetry-thermogravimetric analysis (DSC-TGA). The results show that blending of PAN with PVC leads to improving of the electro spun ability of PVC with more stability, and the mean nanofiber diameter was <span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="44.704pt" style="vertical-align:-0.3499298pt" id="M1" height="8.69875pt" version="1.1" viewBox="-0.0498162 -8.34882 44.704 8.69875"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-58" d="M244 635C114 635 38 519 38 422C38 317 111 240 217 240C236 240 255 244 277 256L345 292C311 140 203 39 59 15L64 -15C89 -15 150 -5 204 17C339 72 440 202 440 386C440 521 368 635 244 635ZM228 602C326 602 352 479 352 390C352 370 351 347 348 324C327 308 293 296 258 296C174 296 124 369 124 458C124 517 152 602 228 602Z"/></g><g transform="matrix(.013,0,0,-0.013,6.241,0)"><path id="g113-49" d="M241 635C89 635 35 457 35 312C35 153 89 -12 240 -12C390 -12 443 166 443 312C443 466 390 635 241 635ZM238 602C329 602 354 454 354 312C354 172 330 22 240 22C152 22 124 173 124 313S148 602 238 602Z"/></g><g transform="matrix(.013,0,0,-0.013,12.481,0)"><path id="g113-47" d="M113 -12C146 -12 170 11 170 46C170 78 146 103 114 103S58 78 58 46C58 11 82 -12 113 -12Z"/></g><g transform="matrix(.013,0,0,-0.013,15.445,0)"><path id="g113-57" d="M249 635C141 635 70 555 70 471C70 401 114 353 179 316C143 294 106 267 90 252C68 231 45 202 45 157C45 50 130 -12 237 -12C322 -12 435 52 435 169C435 256 372 304 303 343C349 374 375 398 383 407C401 429 411 458 411 487C411 569 344 635 249 635ZM238 603C285 603 337 567 337 482C337 422 310 385 276 358C205 393 145 426 145 500C145 552 179 603 238 603ZM248 20C183 20 125 70 125 163C125 218 158 268 206 300C284 261 355 217 355 143C355 66 308 20 248 20Z"/></g><g transform="matrix(.013,0,0,-0.013,21.685,0)"><path id="g113-56" d="M447 623H65C61 580 56 530 47 475H76C100 541 106 550 172 550H388C308 376 196 170 91 -1L98 -12L172 -2C268 204 360 408 455 611L447 623Z"/></g><g transform="matrix(.013,0,0,-0.013,27.927,0)"><path id="g113-52" d="M285 378C315 398 338 416 353 432C373 451 384 474 384 503C384 579 325 635 236 635H235C182 635 136 610 108 579L65 516L85 496C110 533 150 575 205 575C258 575 300 543 300 481C300 407 232 369 141 339L147 310C163 315 188 321 211 321C268 321 338 284 338 192C338 94 288 40 217 40C160 40 119 68 93 91C85 98 77 97 69 91C60 84 47 71 46 58C44 46 48 35 62 22C75 10 116 -12 162 -12C234 -12 424 62 424 224C424 297 373 359 285 376V378Z"/></g><g transform="matrix(.013,0,0,-0.013,37.073,0)"><path id="g117-37" d="M535 290V340H323V533H265V340H52V290H265V84H323V290H535ZM535 -22V28H52V-22H535Z"/></g></svg><span class="ibiop"></span><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="48.281pt" style="vertical-align:-0.3499298pt" height="8.69875pt" version="1.1" viewBox="47.5601838 -8.34882 48.281 8.69875"><g transform="matrix(.013,0,0,-0.013,47.61,0)"><path id="g113-53" d="M456 178V225H360V632H320C217 496 115 347 20 206V178H280V106C280 40 276 34 189 27V0H445V27C364 34 360 39 360 106V178H456ZM280 225H82C149 335 214 431 278 520H280V225Z"/></g><g transform="matrix(.013,0,0,-0.013,53.85,0)"><use xlink:href="#g113-49"/></g><g transform="matrix(.013,0,0,-0.013,60.09,0)"><use xlink:href="#g113-47"/></g><g transform="matrix(.013,0,0,-0.013,63.054,0)"><use xlink:href="#g113-57"/></g><g transform="matrix(.013,0,0,-0.013,69.294,0)"><path id="g113-51" d="M412 140C382 77 369 73 315 73H129L270 222C362 320 402 379 402 466C402 571 322 635 234 635C177 635 130 609 99 576L42 495L64 475C90 514 133 568 201 568C274 568 318 519 318 435C318 349 255 267 193 193C144 135 87 78 32 23V0H405C417 45 427 89 440 131L412 140Z"/></g><g transform="matrix(.013,0,0,-0.013,77.709,0)"><path id="g190-111" d="M524 0V26C466 32 460 36 460 104V297C460 393 411 449 331 449C302 449 276 437 248 419C223 402 201 387 181 372V451C137 432 90 420 42 411V388C96 378 102 374 102 310V104C102 38 97 33 29 26V0H246V26C187 32 181 36 181 104V339C211 365 250 390 290 390C357 390 381 345 381 276V109C381 40 374 32 315 26V0H524Z"/></g><g transform="matrix(.013,0,0,-0.013,84.82,0)"><path id="g190-110" d="M797 0V26C739 32 732 36 732 103V296C732 394 682 449 605 449C576 449 550 437 529 423C504 407 475 389 446 366C425 418 382 449 334 449C303 449 279 437 253 421C222 403 201 385 180 371V452C135 432 85 419 41 411V388C99 379 102 374 102 310V103C102 38 93 32 27 26V0H238V26C189 32 180 38 180 103V338C210 363 250 390 289 390C351 390 377 348 377 275V103C377 37 368 32 306 26V0H520V26C465 32 456 38 456 101V296C456 314 455 326 453 338C491 369 529 390 565 390C628 390 653 345 653 274V107C653 36 642 32 583 26V0H797Z"/></g></svg></span> at 25 : 75 PVC: PAN. Moreover, mechanical properties are ultimate tensile strength and modulus of elasticity decreasing with decreasing the blending ration from pure PVC to 75 : 25 PVC: PAN nanofibers by 71% and 83%, respectively, while the elongation at break increases by 79%, and decomposition temperatures decreased from 451.96 to 345.38°C when changing the PVC content from pure PVC to 25 : 75 PVC: PAN. On the other hand, changing of the nanofiber behavior from hydrophobicity to hydrophilic increased the PAN content in PVC: PAN blends. Furthermore, the low interaction between the chains of polymers and the crystallinity (%) and crystalline size (nm) of blend nanofibers slightly decreased compared to the pure polymers. According to all tests, the 25: 75 PVC: PAN was the best blending ratio, which gave a more stable nanofiber produced at low concentrations and more compatible between the PVC and PAN.

Salih Abbas Habeeb

Baseem Ali Nadhim

Ban Jawad Kadhim

Mohammed Salam Ktab

Ali Jawad Kadhim

Farqad Saleem Murad

Improving the Physical Properties of Nanofibers Prepared by Electrospinning from Polyvinyl Chloride and Polyacrylonitrile at Low Concentrations

Recovery of fat-and-oil production wastes will reduce the technogenic impact on the environment, as well as involve them in a new production cycle as a secondary material resource. As part of solving this problem, the possibilities of using fat-and-oil production wastes in the production of a tyre reclaim and a modified tyre reclaim are considered. In the course of the studies, the fat-and-oil industry wastes’ sorption characteristics are determined, and in relation to oils in static and dynamic conditions, the spent reagent reclamation ways are determined. The authors obtained a tyre reclaim and a modified tyre reclaim using the fat-and-oil industry wastes (soap stock, diatomite, bleaching clay, and fatty acids isolated from soap stock). In this work, the authors studied the possibility of using the fat-and-oil industry wastes in the formulations of a tyre reclaim and a modified tyre reclaim. Extended physical and mechanical tests of experimental rubbers led to the conclusion that it is most expedient to use the fat-and-oil industry wastes in the formulation of rubber compounds for production of sleeper pads for railroad tracks, since when using a tyre reclaim and a modified tyre reclaim, the indicators of rubber properties practically do not change and comply with control standards.

Guzaliya Faritovna Sagitova

Galiya Nyssanovna Kalmatayeva

Saule Abdrazakovna Sakibayeva

Dina Duisenbekkyzy Assylbekova

Ainur Slambekovna Sadyrbayeva

Zhuldyz Kenzhebayevna Shukhanova

Modification of Tyre Rubber Crumb with Wastes of Plant Oil Production

Packaging plastics are called ‘single-use plastics’ because of short lifetime. Among which, the three plastics of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) take more than 70%. Due to incompatibility, few research has been done on the alloy of the three plastics. The aim of this study is to investigate the possibility of single-use plastic alloy (SUPA) of ternary PE, PP, and PET as the 3D printing material. Tensile and bending tests are carried out to investigate the mechanical properties, photographs of scanning electron microscope (SEM) are taken for morphology analysis, and differential scanning calorimetry (DSC) are used to study the crystallization behavior of the alloys. The results show that there is an optimal ratio for all the components to obtain the best mechanical performances, i.e., the ratio of <span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="19.984pt" style="vertical-align:-2.15067pt" id="M1" height="11.439pt" version="1.1" viewBox="-0.0498162 -9.28833 19.984 11.439"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g190-81" d="M46 650V622C120 617 128 613 128 525V125C128 42 120 34 40 28V0H311V28C221 34 212 39 212 124V281L286 262C297 261 316 261 331 263C429 275 526 338 526 468C526 533 501 579 462 609C422 638 364 650 293 650H46ZM212 559C212 588 215 600 223 606C230 613 251 618 279 618C361 618 430 572 430 464C430 337 350 302 285 302C252 302 225 309 212 314V559Z"/></g><g transform="matrix(.013,0,0,-0.013,7.254,0)"><use xlink:href="#g190-81"/></g><g transform="matrix(.013,0,0,-0.013,14.628,0)"><path id="g113-48" d="M368 703H309L44 -163H104L368 703Z"/></g></svg><span class="isep"/><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="25.956pt" style="vertical-align:-2.15067pt" height="11.439pt" version="1.1" viewBox="19.939183800000002 -9.28833 25.956 11.439"><g transform="matrix(.013,0,0,-0.013,19.989,0)"><use xlink:href="#g190-81"/></g><g transform="matrix(.013,0,0,-0.013,27.242,0)"><path id="g190-70" d="M517 162C503 123 484 88 467 68C445 42 417 34 341 34C291 34 256 34 237 47C219 59 213 81 213 128V317H308C395 317 402 311 415 240H444V431H415C403 364 398 356 307 356H213V584C213 613 215 616 246 616H322C394 616 421 609 435 587C448 566 458 544 467 502L496 506C493 557 488 625 488 650H42V622C120 616 128 612 128 523V125C128 43 120 35 29 28V0H511C520 31 540 125 546 158L517 162Z"/></g><g transform="matrix(.013,0,0,-0.013,38.314,0)"><path id="g117-34" d="M535 323V373H52V323H535ZM535 138V188H52V138H535Z"/></g></svg><span class="irelop"/><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="17.837pt" style="vertical-align:-2.15067pt" height="11.439pt" version="1.1" viewBox="49.5261838 -9.28833 17.837 11.439"><g transform="matrix(.013,0,0,-0.013,49.576,0)"><path id="g113-53" d="M456 178V225H360V632H320C217 496 115 347 20 206V178H280V106C280 40 276 34 189 27V0H445V27C364 34 360 39 360 106V178H456ZM280 225H82C149 335 214 431 278 520H280V225Z"/></g><g transform="matrix(.013,0,0,-0.013,55.817,0)"><path id="g113-49" d="M241 635C89 635 35 457 35 312C35 153 89 -12 240 -12C390 -12 443 166 443 312C443 466 390 635 241 635ZM238 602C329 602 354 454 354 312C354 172 330 22 240 22C152 22 124 173 124 313S148 602 238 602Z"/></g><g transform="matrix(.013,0,0,-0.013,62.057,0)"><use xlink:href="#g113-48"/></g></svg><span class="isep"/><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="12.731pt" style="vertical-align:-2.15067pt" height="11.439pt" version="1.1" viewBox="67.36818380000001 -9.28833 12.731 11.439"><g transform="matrix(.013,0,0,-0.013,67.418,0)"><path id="g113-55" d="M137 343C167 482 260 545 321 574C357 591 397 603 429 609L423 641C382 634 335 622 295 608C189 570 37 457 37 238C37 84 125 -12 242 -12C362 -12 447 89 447 209C447 311 374 393 267 393C247 393 226 386 204 376L137 343ZM227 337C318 337 361 256 361 173C361 105 336 22 258 22C176 22 126 120 126 240C126 266 127 291 132 310C155 323 189 337 227 337Z"/></g><g transform="matrix(.013,0,0,-0.013,73.658,0)"><use xlink:href="#g113-49"/></g></svg></span> with 20 wt% PET, 2 wt% maleic anhydride grafted polypropylene (PP-g-MAH) and 2 wt% organic modified montmorillonite (OMMT). This SUPA has a tensile strength of 14.48 MPa, a tensile modulus of 586.42 MPa, a flexural strength of 15.85 MPa, and a flexural modulus of 544.67 MPa. Due to the function of compatibilizer and nanoclay (NC) will be affected by redundancy, the potential primary fibrosis while collecting the feeding filaments and the secondary fibrosis at the nozzle of 3D printing might be responsible for the variation of the mechanical performances.

Wang Liao

Jie Wang

Manping Pan

Fused Deposition Modeling of Single-Use Plastic Alloy

Vinyl acetate (VAc) was polymerized to about 90% conversion in 9 h at 40°C from the colloidal microstructure of the VAc/fumed silica/cetyltrimethylammonium bromide (CTAB) system. The glass transition (<span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-5.52898pt" id="M1" height="14.4911pt" version="1.1" viewBox="-0.0498162 -8.96212 13.0802 14.4911" width="13.0802pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-85" d="M620 675H597C578 656 570 650 541 650H144C112 650 104 653 94 675H72C59 618 42 552 23 493L53 491C71 534 88 564 105 585C124 608 144 615 238 615H290L197 121C182 40 174 34 88 28L82 0H361L367 28C275 34 266 38 281 121L374 615H441C522 615 543 608 553 583C562 560 566 531 565 493L597 494C603 551 612 629 620 675Z"/></g><g transform="matrix(.0091,0,0,-0.0091,7.176,3.132)"><path id="g50-104" d="M554 433L549 437C539 437 513 441 503 443C481 447 456 451 436 451C354 451 268 415 216 368C150 308 99 205 99 106C99 24 136 -12 165 -12C196 -12 243 14 268 33C318 70 374 118 415 181H419L395 39C374 -84 332 -149 295 -175C269 -193 245 -197 212 -197C137 -197 93 -156 76 -102C71 -87 61 -87 51 -96C36 -110 24 -130 24 -147C24 -183 76 -257 171 -257C226 -257 285 -227 323 -200C387 -155 455 -76 480 94C499 225 538 391 554 433ZM460 386C457 361 438 287 426 254C408 218 373 176 332 133C294 93 246 61 217 61C198 61 186 80 186 122C186 167 206 250 231 294C262 349 288 375 317 387C334 394 358 400 381 400C413 400 439 393 460 386Z"/></g></svg>)</span> of poly(vinyl acetate) (PVAc) polymerized in these emulsion gels with silica was higher (<span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="24.217pt" style="vertical-align:-5.529001pt" id="M2" height="16.3257pt" version="1.1" viewBox="-0.0498162 -10.7967 24.217 16.3257"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-85"/></g><g transform="matrix(.0091,0,0,-0.0091,7.176,3.132)"><use xlink:href="#g50-104"/></g><g transform="matrix(.013,0,0,-0.013,16.586,0)"><path id="g117-34" d="M535 323V373H52V323H535ZM535 138V188H52V138H535Z"/></g></svg><span class="irelop"/><span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="25.374pt" style="vertical-align:-5.529001pt" height="16.3257pt" version="1.1" viewBox="27.7981838 -10.7967 25.374 16.3257"><g transform="matrix(.013,0,0,-0.013,27.848,0)"><path id="g113-53" d="M456 178V225H360V632H320C217 496 115 347 20 206V178H280V106C280 40 276 34 189 27V0H445V27C364 34 360 39 360 106V178H456ZM280 225H82C149 335 214 431 278 520H280V225Z"/></g><g transform="matrix(.013,0,0,-0.013,34.089,0)"><path id="g113-50" d="M384 0V27C293 34 287 42 287 114V635C232 613 172 594 109 583V559L157 557C201 555 205 550 205 499V114C205 42 199 34 109 27V0H384Z"/></g><g transform="matrix(.0091,0,0,-0.0091,40.375,-5.741)"><path id="g54-73" d="M339 262C339 340 273 403 193 403S48 340 48 262S113 121 193 121S339 184 339 262ZM283 262C283 210 242 168 193 168S104 210 104 262S144 356 193 356S283 314 283 262Z"/></g><g transform="matrix(.013,0,0,-0.013,44.39,0)"><path id="g190-68" d="M614 175C564 76 510 21 408 21C256 21 146 149 146 336C146 488 235 629 402 629C510 629 570 586 597 480L626 488C620 541 614 582 606 638C578 643 510 665 429 665C206 665 44 527 44 316C44 157 153 -15 402 -15C474 -15 558 5 586 11C604 45 629 119 643 165L614 175Z"/></g></svg>)</span></span> than those of PVAc made from bulk polymerization at 60°C (<span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="24.217pt" style="vertical-align:-5.529001pt" id="M3" height="16.3257pt" version="1.1" viewBox="-0.0498162 -10.7967 24.217 16.3257"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-85"/></g><g transform="matrix(.0091,0,0,-0.0091,7.176,3.132)"><use xlink:href="#g50-104"/></g><g transform="matrix(.013,0,0,-0.013,16.586,0)"><use xlink:href="#g117-34"/></g></svg><span class="irelop"/><span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="25.374pt" style="vertical-align:-5.529001pt" height="16.3257pt" version="1.1" viewBox="27.7981838 -10.7967 25.374 16.3257"><g transform="matrix(.013,0,0,-0.013,27.848,0)"><path id="g113-52" d="M285 378C315 398 338 416 353 432C373 451 384 474 384 503C384 579 325 635 236 635H235C182 635 136 610 108 579L65 516L85 496C110 533 150 575 205 575C258 575 300 543 300 481C300 407 232 369 141 339L147 310C163 315 188 321 211 321C268 321 338 284 338 192C338 94 288 40 217 40C160 40 119 68 93 91C85 98 77 97 69 91C60 84 47 71 46 58C44 46 48 35 62 22C75 10 116 -12 162 -12C234 -12 424 62 424 224C424 297 373 359 285 376V378Z"/></g><g transform="matrix(.013,0,0,-0.013,34.089,0)"><use xlink:href="#g113-50"/></g><g transform="matrix(.0091,0,0,-0.0091,40.375,-5.741)"><use xlink:href="#g54-73"/></g><g transform="matrix(.013,0,0,-0.013,44.39,0)"><use xlink:href="#g190-68"/></g></svg>)</span></span> and the weight average molar mass (<span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.291101pt" id="M4" height="11.927pt" version="1.1" viewBox="-0.0498162 -8.6359 19.4584 11.927" width="19.4584pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-78" d="M962 650H795L470 145L347 650H176L170 622C268 613 275 606 244 503L190 322C150 188 132 126 118 91C102 50 80 33 18 28L12 0H245L251 28C175 35 170 48 174 93C177 128 191 180 220 284L292 542H294C331 392 383 150 409 4H432L774 555H776L714 137C700 40 694 34 612 28L606 0H868L874 28C793 34 784 37 797 137L849 533C859 612 863 616 956 622L962 650Z"/></g><g transform="matrix(.0091,0,0,-0.0091,12.22,3.132)"><path id="g50-120" d="M698 334C698 397 680 451 655 451C627 451 602 424 602 397C602 389 605 383 614 371C622 360 624 340 624 317C624 161 546 47 458 47C419 47 389 69 389 125C389 142 391 162 397 185L457 430L451 435L380 421L315 164C301 107 266 47 222 47C182 47 153 69 153 126C153 137 157 162 161 185C166 214 179 265 197 334C203 358 208 385 208 407C208 433 201 451 176 451C124 451 64 404 24 348L44 320C86 366 113 382 121 382C126 382 128 381 128 374C128 368 126 356 122 341C102 266 88 204 81 164C77 143 73 121 73 107C73 23 131 -12 187 -12C234 -12 281 10 322 45C343 5 383 -12 422 -12C559 -12 698 174 698 334Z"/></g></svg>)</span> was also larger (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.291101pt" id="M5" height="11.927pt" version="1.1" viewBox="-0.0498162 -8.6359 19.4584 11.927" width="19.4584pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-78"/></g><g transform="matrix(.0091,0,0,-0.0091,12.22,3.132)"><use xlink:href="#g50-120"/></g></svg> about 300 kg/mol) than those from bulk polymerization (<span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="30.576pt" style="vertical-align:-3.403299pt" id="M6" height="12.7112pt" version="1.1" viewBox="-0.0498162 -9.3079 30.576 12.7112"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-78"/></g><g transform="matrix(.0091,0,0,-0.0091,12.22,3.132)"><use xlink:href="#g50-120"/></g><g transform="matrix(.013,0,0,-0.013,22.945,0)"><use xlink:href="#g117-34"/></g></svg><span class="irelop"/><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="38.83pt" style="vertical-align:-3.403299pt" height="12.7112pt" version="1.1" viewBox="34.158183799999996 -9.3079 38.83 12.7112"><g transform="matrix(.013,0,0,-0.013,34.208,0)"><use xlink:href="#g113-50"/></g><g transform="matrix(.013,0,0,-0.013,40.448,0)"><path id="g113-51" d="M412 140C382 77 369 73 315 73H129L270 222C362 320 402 379 402 466C402 571 322 635 234 635C177 635 130 609 99 576L42 495L64 475C90 514 133 568 201 568C274 568 318 519 318 435C318 349 255 267 193 193C144 135 87 78 32 23V0H405C417 45 427 89 440 131L412 140Z"/></g><g transform="matrix(.013,0,0,-0.013,46.688,0)"><path id="g113-54" d="M153 550H386L412 615L406 623H120L82 318C104 327 142 338 184 338C294 338 347 275 347 187C347 112 305 39 221 39C160 39 119 71 97 89C88 97 80 96 71 90C59 80 50 67 49 57C48 45 52 36 66 23C80 9 123 -12 169 -12C221 -11 288 15 342 59C403 109 431 165 431 225C431 308 366 395 238 395C212 395 165 379 127 364L153 550Z"/></g><g transform="matrix(.013,0,0,-0.013,55.103,0)"><path id="g190-108" d="M513 0V26C475 28 448 43 413 81C379 116 277 234 258 264C301 314 319 334 344 359C383 396 404 407 473 418V443L269 434V408C317 403 320 395 299 364C280 337 250 298 228 276C213 260 195 247 165 241V712C126 699 69 682 21 677V653C82 648 87 642 87 576V104C87 40 81 32 14 26V0H237V26C173 32 165 38 165 104V215C171 217 176 218 181 218C189 218 198 212 212 196C267 129 330 49 376 -2L513 0Z"/></g><g transform="matrix(.013,0,0,-0.013,61.551,0)"><path id="g190-104" d="M463 437C426 431 375 425 327 422C297 440 264 449 231 449H230C153 449 51 396 51 283C51 215 94 168 139 149C123 129 91 103 51 88C50 78 53 60 62 46C75 25 100 2 136 -9C112 -28 73 -59 53 -79C38 -94 29 -113 29 -135C30 -192 91 -257 203 -257C336 -257 452 -160 452 -59C452 39 371 59 309 59C275 59 240 58 203 58C158 58 140 77 140 96C140 110 157 129 170 138C186 135 205 133 221 133C306 133 396 185 396 293C396 328 384 360 366 381L423 378C439 387 459 413 468 429L463 437ZM219 418C277 418 314 362 314 284C314 205 275 166 231 165C176 165 137 221 137 299C137 376 177 418 219 418ZM241 -11C285 -11 314 -14 339 -24C367 -36 384 -61 384 -95C384 -157 335 -206 240 -206C166 -206 108 -165 108 -110C108 -82 128 -54 154 -32C172 -17 195 -11 241 -11Z"/></g><g transform="matrix(.013,0,0,-0.013,67.682,0)"><path id="g113-48" d="M368 703H309L44 -163H104L368 703Z"/></g></svg><span class="isep"/><span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="20.759pt" style="vertical-align:-3.403299pt" height="12.7112pt" version="1.1" viewBox="72.99318380000001 -9.3079 20.759 12.7112"><g transform="matrix(.013,0,0,-0.013,73.043,0)"><path id="g190-110" d="M797 0V26C739 32 732 36 732 103V296C732 394 682 449 605 449C576 449 550 437 529 423C504 407 475 389 446 366C425 418 382 449 334 449C303 449 279 437 253 421C222 403 201 385 180 371V452C135 432 85 419 41 411V388C99 379 102 374 102 310V103C102 38 93 32 27 26V0H238V26C189 32 180 38 180 103V338C210 363 250 390 289 390C351 390 377 348 377 275V103C377 37 368 32 306 26V0H520V26C465 32 456 38 456 101V296C456 314 455 326 453 338C491 369 529 390 565 390C628 390 653 345 653 274V107C653 36 642 32 583 26V0H797Z"/></g><g transform="matrix(.013,0,0,-0.013,83.638,0)"><path id="g190-112" d="M257 449C165 449 37 374 37 209C37 98 119 -12 256 -12C355 -12 473 65 473 226C473 349 381 449 257 449ZM244 416C333 416 380 320 380 204C380 67 329 21 267 21C184 21 130 115 130 241C130 354 184 416 244 416Z"/></g><g transform="matrix(.013,0,0,-0.013,90.177,0)"><path id="g190-109" d="M238 0V26C174 32 166 38 166 104V712C132 700 70 683 18 677V653C81 647 87 645 87 577V104C87 38 78 32 15 26V0H238Z"/></g></svg>).</span></span> Increased <span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.291101pt" id="M7" height="11.927pt" version="1.1" viewBox="-0.0498162 -8.6359 19.4584 11.927" width="19.4584pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-78"/></g><g transform="matrix(.0091,0,0,-0.0091,12.22,3.132)"><use xlink:href="#g50-120"/></g></svg>,</span> <span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-5.52898pt" id="M8" height="14.4911pt" version="1.1" viewBox="-0.0498162 -8.96212 13.0802 14.4911" width="13.0802pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-85"/></g><g transform="matrix(.0091,0,0,-0.0091,7.176,3.132)"><use xlink:href="#g50-104"/></g></svg>,</span> and lowered processing temperature for these composites could facilitate new applications for PVAc.

Nazreen Zavahir

Tan Zhang

Frank D. Blum

Madhubhashini Maddumaarachchi

Low Temperature, <i>In Situ</i> Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels

Research shows that the composite material is used as an adsorbent to remove pollutants from wastewater. This work is aimed at producing a novel composite film comprising chitosan, polyvinyl alcohol, and cornstarch incorporating nanocellulose (CPCN). The composite film was prepared by a blending method wherein nanocellulose was extracted using a chemical method from banana bract. The prepared CPCN was characterized using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) with EDX to understand their molecular interaction and surface morphology, respectively. The effect of parameters including pH, adsorbent dosage, initial dye concentration, and contact time on the adsorption of methylene blue (MB) dye was studied. The maximum adsorption was found to be up to 63.13 mg/g MB with a pH of 10, adsorbent dosage of 2 g, an initial concentration of 150 ppm, and contact time of 120 min at room temperature (25°C) indicating a moderate adsorption capacity of the CPCN. Comparing the Langmuir and Freundlich adsorption isotherm models, the former fitted well with MB dye adsorption data, implying that the models can be applied to uptake MB dye by CPCN. In the kinetic adsorption experiment, the adsorbed dye almost reached equilibrium at about 120 min for the CPCN and followed the pseudo-second-order kinetic model. Therefore, the CPCN can be used as a potential adsorbent in wastewater treatment.

Ismat Ara Eti

Marufa Khatun

Most. Afroza Khatun

Md. Owaleur Rahman

K. M. Anis-Ul-Haque

Md. Jahangir Alam

Removal of Dye from Wastewater Using a Novel Composite Film Incorporating Nanocellulose

About this journal

<p><em>Advances in Polymer Technology </em>publishes articles reporting important developments in polymeric materials, their manufacture and processing, polymer product design and considering the economic and environmental impacts of polymer technology.</p>


Journal profile

Meet the editorial board

<p>Chief Editor Dr. Ning Zhu is a Professor at Nanjing Tech University, China. His current research focuses on the design, synthesis, and application of bio-based materials and functional polymers based on microflow technology and catalysis.</p>


Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

Advances in Polymer Technology - Table of contents 2023

title

Advances in Polymer Technology publishes articles reporting important developments in polymeric materials, their manufacture and processing, polymer product design and considering the economic and environmental impacts of polymer technology.

Advances in Polymer Technology