This study synthesized silver nanoparticles (Ag-NPs) using silver nitrate (AgNO3) as the ion source and sodium tripolyphosphate (STPP) as reducing as well as capping agents. The synthesized Ag-NPs were confirmed initially using Ag-NPs specific λmax at 410 nm with UV-Vis spectrophotometry and homogenously distributed, 100–300 nm size, and round-shaped particles were realized through atomic force microscopy (AFM) and transmission electron microscopy (TEM) image analysis. The various reaction condition-based studies revealed 0.01 M AgNO3 yields maximum particle after 4 h reduction with 1% STPP. Bacillus spp. (n = 23/90) and Pseudomonas spp. (n = 26/90) were isolated from three different poultry farms for evaluating the antibacterial activity of Ag-NPs. Among the PCR confirmed isolates, 52% (12/23) Bacillus spp. were resistant to ten antibiotics and 65% (17/26) Pseudomonas spp. were resistant to eleven antibiotics. The representative resistant isolates were subjected to antibacterial evaluation of synthesized Ag-NPs following the well diffusion method, revealing the maximum sensitive zone of inhibition 19 ± 0.2 mm against Bacillus spp. and 17 ± 0.38 mm against Pseudomonas spp. The minimum inhibitory concentration (MIC) and minimum bacterial concentration (MBC) of Ag-NPs were 2.1 μg/ml and 8.4 μg/ml, respectively, for broad-spectrum application. Finally, the biocompatibility was determined by observing the viability of Ag-NP-treated BHK-21 cell through trypan blue-based exclusion assay revealing nonsignificant decreased of cell viability ≤2MIC doses. Thus, the synthesized Ag-NPs were proven as biocompatible and sensitive to both Gram-positive and Gram-negative bacteria of the poultry farm environmental samples.

Aminur Rahman

Harunur Rasid

Md. Isahak Ali

Nymul Yeachin

Md. Shahin Alam

Khandker Saadat Hossain

Md. Abdul Kafi

Facile Synthesis and Application of Ag-NPs for Controlling Antibiotic-ResistantPseudomonas spp. and Bacillus spp. in a Poultry Farm Environment

Hydroxyapatite nanoparticles (nHAPs) have been recognized for potent antitumor effects in certain cancer cells, making them good candidates as drug delivery agents and tumor therapeutics with fewer than normal side effects. This study is aimed to correlate cell proliferation inhibition with the size and morphology of nHAPs in a human breast cancer cell line as well as in normal tissue cells. We present our in vitro experimental evidence that nHAPs with sizes smaller than 50 nm have high inhibitory activity against human MCF-7 breast cancer cell lines. Based on our experimental data, normal fibroblast cells (NIH 3T3) were relatively more viable upon treatment with the nanoconstructs. The present study indicates that nHAPs can be engineered as nontoxic specific inhibitors as efficient breast cancer therapeutics in humans.

Moeko Fukada

Tilak Chhetri

Agasthya Suresh

Anandhi Upendran

Zahra Afrasiabi

Size and Morphology-Mediated Antiproliferative Activity of Hydroxyapatite Nanoparticles in Human Breast Cancer Cells

A Fe3O4@ZnO/C nanocomposite with a core-shell structure was synthesized using the co-precipitation method. To prevent the aggregation of the Fe3O4 magnetic particles, polyethylene glycol (PEG) was added. The X-ray diffractometer (XRD) results confirmed the formation of Fe3O4 and ZnO phases, with Fe3O4 having a cubic crystal system and ZnO having a hexagonal crystal system. Carbon in Fe3O4@ZnO/C had no effect on the crystal structure of Fe3O4@ZnO. Images from transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed that the nanocomposite formed a core-shell structure. The Fourier transform infrared (FTIR) spectra verified the presence of bonds among ZnO, Fe3O4, and carbon. The appearance of the stretching vibration of the C≡C bond on the Fe3O4@ZnO/C sample revealed the nanocomposites’ carbon coupling. Photoluminescence (PL) spectroscopy was used to characterize the optical properties of the nanocomposites. Based on the results of the PL, the sample absorption of visible light was in the wavelength range of 400–700 nm. The photoluminescence of Fe3O4@ZnO differed from that of the Fe3O4@ZnO/C, especially in the deep-level emission (DLE) band. There was a phenomenon of broadening and shift of the band at a shorter wavelength, namely, in the blue wavelength region. Magnetic properties were characterized by vibrating-sample magnetometry (VSM). Based on the VSM results, the sample coupled with carbon exhibited a decrease in magnetic saturation. The presence of carbon changed photon energy into thermal energy. So, this material, apart from being a bioimaging material, can also be developed as a photothermal therapy material.

Astuti

Syukri Arief

Muldarisnur

Zulhadjri

R. A. Usna

Synthesis and Properties of Magnetic-Luminescent Fe3O4@ZnO/C Nanocomposites

This study provides the formation of semiconductor nanowires (NWs) with a singular facet and a curved end surface by the vapor-liquid-solid (VLS) process that is analyzed and explained in details. Given the evidence, it is confirmed that the wettability of a liquid catalyst droplet on a crystal surface and the contact angle between the droplet and crystal play an essential role in the VLS process of NWs development. It is shown that for the VLS mechanism, the formation of NWs depends on the reduction in activation barrier to crystallization caused by the release of surplus-free energy by a spheroidizing drop in the region of the triple junction during the process of lowering surface area. This decreases the necessary supersaturation for the development of NW vertex facets at a fixed growth rate. The source of the extra free energy that drives the catalyst droplet movement during the steady-state development of NWs is the droplet’s outer surface. During the formation of NWs, those angles of inclination of the lateral surface NWs and droplet contact are obtained at which the solid/vapor, solid/liquid, and liquid/vapor interfaces experience the smallest increase in free energy. The wetting hysteresis is demonstrated to occur at the vertex of NWs, and the contact angle of a catalyst droplet may be regarded as an independent and fully-fledged thermodynamic parameter of the system’s state.

Valery A. Nebol’sin

Nada Swaikat

About Some Fundamental Aspects of the Growth Mechanism Vapor-Liquid-Solid Nanowires

The textile industry’s discharges have long been regarded as severe water pollution. The photocatalytic degradation of dyes using semiconductors is one of the crucial methods. The present study efficiently used the mechanical method to synthesize Iron oxide Nanoparticles. XRD, FT-IR, UV-Vis DRS, and Raman analyses were performed to analyze the structural and optical. From the data provided by XRD and Raman data, we believed that the as-synthesized Iron oxide was pure hematite (α-Fe2O3) with a hexagonal structure. Additionally, the EDS results show that the synthesized material is pure. By adjusting specific parameters, including the dye concentration, the catalyst dosage, the pH, and the oxidizing agent such as H2O2 and K2S2O8, the degradation of eosin yellowish using Fe2O3 as a photocatalyst has been discussed. Additionally, the kinetics of eosin yellowish degradation has been studied. A study was also conducted using Fe2O3 nanoparticles attached to polyurethane polymer (PU) to investigate its photocatalytic activity on methylene blue, methyl orange, and indigo carmine. In 30 minutes, nearly 90% of the dyes had degraded. The total organic carbon (TOC) analysis confirmed this result.

Bachir Yaou Balarabe

Maman Nasser Illiassou Oumarou

Abdoul Salam Koroney

Irédon Adjama

Abdoul Razak Ibrahim Baraze

Photo-Oxidation of Organic Dye by Fe2O3 Nanoparticles: Catalyst, Electron Acceptor, and Polyurethane Membrane (PU-Fe2O3) Effects

Interfacial carrier transfer kinetics is critical to the efficiency and stability of perovskite solar cells. Herein, we measure the regeneration rate constant, absorption cross-section, reduction rate constant, and conductivity of hole transport layered perovskites using scanning electrochemical microscopy (SECM). The SECM feedback revealed that the regeneration rate constant, absorption cross-section, and reduction rate constant of the nickel oxide (NiO) layer perovskite layer are higher than those of the poly (3,4-ethyenedioxythiophene)-poly (styrenesulfonate) layered perovskite. Also, at a specific flux density (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.309401pt" id="M1" height="11.9453pt" version="1.1" viewBox="-0.0498162 -8.6359 14.5807 11.9453" width="14.5807pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-75" d="M429 650H175L169 622C251 614 259 612 244 532L174 152C163 91 152 37 135 -6C109 -72 67 -101 23 -113L33 -144C45 -143 73 -134 102 -119C186 -76 229 -1 254 133L327 532C341 609 347 613 423 622L429 650Z"/></g><g transform="matrix(.0091,0,0,-0.0091,5.031,3.132)"><path id="g50-105" d="M509 90L493 118C465 91 427 70 418 70S409 77 415 103L469 327C494 429 466 451 436 451C412 451 387 444 356 427C307 400 222 342 160 264H158L246 667C253 701 252 710 243 710C228 710 169 680 87 673L83 644H117C155 644 160 640 149 588L24 -4L32 -12C57 -4 86 4 108 9L143 187C198 275 324 386 375 386C394 386 399 367 385 311L331 87C315 22 322 -12 351 -12C387 -12 452 24 509 90Z"/></g><g transform="matrix(.0091,0,0,-0.0091,9.827,3.132)"><path id="g185-40" d="M219 86C216 168 211 250 206 337C201 410 189 448 163 448C131 448 79 396 43 344L60 322C91 359 110 375 118 375S132 358 136 298C141 238 152 81 155 -12H182C242 62 331 177 390 258C435 321 451 360 451 391C450 424 432 448 408 448C390 448 372 435 366 419C362 410 362 401 366 394C373 383 376 367 376 350C376 283 262 138 221 86H219Z"/></g></svg>), the value of the regeneration rate constant (keff) in both blue and red illuminations for the NiO/CH3NH3PbI3 film is significantly higher than in both PEDOT: PSS/CH3NH3PbI3 and FTO/CH3NH3PbI3 films. The difference in keff between layered and nonlayered perovskite conforms to the impact of the hole conducting layer on the charge transfer kinetics. According to the findings, SECM is a powerful approach for screening an appropriate hole transport layer for stable perovskite solar cells.

Getachew Alemu Anshebo

Ataklti Abraha Gebreyohanes

Bizuneh Gebremichael Difer

Teketel Alemu Anshebo

Scanning Electrochemical Microscope Studies of Charge Transfer Kinetics at the Interface of the Perovskite/Hole Transport Layer

Moore’s law is approaching its limit due to various challenges, especially the size limit of the transistors. The International Roadmap for Devices and Systems (IRDS), the successor of International Technology Roadmap for Semiconductors (ITRS), has included 2D materials as an alternative approach for the More-than-Moore nanoelectronic applications. Among the 2D materials, graphene nanoribbons (GNRs) have been widely used as the alternative channel materials of field-effect transistors (FETs). In this paper, the impacts of physical scaling on the device performance of double-gate Schottky-barrier GNR FETs (DG-SB-GNRFETs) are investigated by using NanoTCAD ViDES simulation tool based on the tight-binding Hamiltonian and self-consistent solutions of 3D Poisson and Schrödinger equations with open boundary conditions within the nonequilibrium Green’s function formalism. The extracted device performance parameters include the subthreshold swing and on-to-off current ratio. The results suggest that the performances of DG-SB-GNRFETs are strongly dependent on their physical parameters, especially the widths of the GNRs.

Mu Wen Chuan

Muhammad Amirul Irfan Misnon

Nurul Ezaila Alias

Michael Loong Peng Tan

Device Performance of Double-Gate Schottky-Barrier Graphene Nanoribbon Field-Effect Transistors with Physical Scaling

About this journal

Journal of Nanotechnology publishes papers related to the science and technology of nanosized and nanostructured materials, with emphasis on their design, characterization, functionality, and preparation for implementation in systems and devices.

Journal profile

Meet the editorial board

Journal of Nanotechnology maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.

Editor spotlight

Submit to Special Issue

We currently have a number of Special Issues open for submission. Special Issues highlight emerging areas of research within a field, or provide a venue for a deeper investigation into an existing research area.

Special Issues

Author guidelines

Editorial board

Databases and indexing

Journal of Nanotechnology - Table of contents 2023

title

Journal of Nanotechnology publishes papers related to the science and technology of nanosized and nanostructured materials, with emphasis on their design, characterization, functionality, and preparation for implementation in systems and devices.

Journal of Nanotechnology